[4.19,125/190] PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary |
|
|
|
|
2019-09-13 |
gregkh@linuxfoundation.org |
|
New |
[4.19,092/190] drm/nouveau: Dont WARN_ON VCPI allocation failures |
|
1 |
|
|
2019-09-13 |
gregkh@linuxfoundation.org |
|
New |
nouveau: no need to check return value of debugfs_create functions |
|
|
|
|
2019-06-13 |
gregkh@linuxfoundation.org |
|
New |
[5.1,096/122] PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary |
|
|
|
|
2019-05-23 |
gregkh@linuxfoundation.org |
|
New |
[5.0,087/139] PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary |
|
|
|
|
2019-05-23 |
gregkh@linuxfoundation.org |
|
New |
Patch "PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary" has been added to the 5.1-stabl... |
|
|
|
|
2019-05-23 |
gregkh@linuxfoundation.org |
|
New |
Patch "PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary" has been added to the 5.0-stabl... |
|
|
|
|
2019-05-23 |
gregkh@linuxfoundation.org |
|
New |
[4.14,148/159] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses |
1 |
|
|
1 |
2018-02-23 |
gregkh@linuxfoundation.org |
|
New |
[3.18,54/58] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses |
1 |
|
|
1 |
2018-02-23 |
gregkh@linuxfoundation.org |
|
New |
[4.9,083/145] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses |
1 |
|
|
1 |
2018-02-23 |
gregkh@linuxfoundation.org |
|
New |
[4.4,059/193] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses |
1 |
|
|
1 |
2018-02-23 |
gregkh@linuxfoundation.org |
|
New |
[4.12,35/43] drm/nouveau: Fix error handling in nv50_disp_atomic_commit |
|
1 |
2 |
|
2017-09-08 |
gregkh@linuxfoundation.org |
|
New |
[4.13,39/47] drm/nouveau: Fix error handling in nv50_disp_atomic_commit |
|
1 |
2 |
|
2017-09-08 |
gregkh@linuxfoundation.org |
|
New |
[4.4,137/163] x86/mm/kmmio: Fix mmiotrace for hugepages |
|
|
|
1 |
2016-05-03 |
gregkh@linuxfoundation.org |
|
New |
[4.5,160/200] x86/mm/kmmio: Fix mmiotrace for hugepages |
|
|
|
1 |
2016-05-03 |
gregkh@linuxfoundation.org |
|
New |
[v5,2/2] nv110/exa: update sched codes |
|
|
|
|
2017-07-01 |
Aaryaman Vasishta |
|
New |
[1/2] nv110/exa: Remove depbars |
|
|
|
|
2017-07-01 |
Aaryaman Vasishta |
|
New |
[v4] nv110/exa: update sched codes |
|
|
|
|
2017-06-27 |
Aaryaman Vasishta |
|
New |
[v3] nv110/exa: update sched codes |
|
|
|
|
2017-06-10 |
Aaryaman Vasishta |
|
New |
[v2] nv110/exa: update sched codes |
|
|
|
|
2017-06-03 |
Aaryaman Vasishta |
|
New |
nv110/exa: update sched codes |
|
|
|
|
2017-06-03 |
Aaryaman Vasishta |
|
New |
drm/nouveau: enable interrupts on cards with 32 intr lines |
|
|
|
|
2017-04-02 |
Adam Borowski |
|
New |
[v3,10/10] drm/nouveau: Enable stereoscopic 3D output over HDMI |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,09/10] drm/nouveau: Handle frame-packing mode geometry and timing effects |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,08/10] drm/nouveau: Use supplied HDMI InfoFrames on GK104 hardware |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,07/10] drm/nouveau: Use supplied HDMI InfoFrames on GF119 hardware |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,06/10] drm/nouveau: Use supplied HDMI InfoFrames on GT215 hardware |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,05/10] drm/nouveau: Use supplied HDMI InfoFrames on G84 hardware |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,04/10] drm/nouveau: Add mechanism to convert HDMI InfoFrames to hardware format |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,03/10] drm/nouveau: Pass mode-dependent AVI and Vendor HDMI InfoFrames to NVKM |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,02/10] drm/nouveau: Extend NVKM HDMI power control method to set InfoFrames |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v3,01/10] drm/nouveau: Clean up nv50_head_atomic_check_mode() and fix blankus calculation |
|
|
|
|
2017-04-11 |
Alastair Bridgewater |
|
New |
[v2,10/10] drm/nouveau: Enable stereoscopic 3D output over HDMI |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,09/10] drm/nouveau: Handle frame-packing mode geometry and timing effects |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,08/10] drm/nouveau: Use supplied HDMI InfoFrames on GK104 hardware |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,07/10] drm/nouveau: Use supplied HDMI InfoFrames on GF119 hardware |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,06/10] drm/nouveau: Use supplied HDMI InfoFrames on GT215 hardware |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,05/10] drm/nouveau: Use supplied HDMI InfoFrames on G84 hardware |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,04/10] drm/nouveau: Add mechanism to convert HDMI InfoFrames to hardware format |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,03/10] drm/nouveau: Pass mode-dependent AVI and Vendor HDMI InfoFrames to NVKM |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,02/10] drm/nouveau: Extend NVKM HDMI power control method to set InfoFrames |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[v2,01/10] drm/nouveau: Use drm_mode_set_crtcinfo() to compensate for vscan / ilace |
|
|
|
|
2017-03-27 |
Alastair Bridgewater |
|
New |
[6/6] drm/nouveau: Enable stereoscopic 3D output over HDMI |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
[5/6] drm: Delete "mandatory" stereographic modes |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
[4/6] drm/nouveau: Use supplied HDMI InfoFrames on GK104 hardware |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
[3/6] drm/nouveau: Use supplied HDMI InfoFrames on GT215 hardware |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
[2/6] drm/nouveau: Pass mode-dependent AVI and Vendor HDMI InfoFrames to NVKM |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
[1/6] drm/nouveau: Extend NVKM HDMI power control method to set InfoFrames |
|
|
|
|
2017-01-17 |
Alastair Bridgewater |
|
New |
drm/nouveau: Fix HDA ELD handling (thus, HDMI audio) on gt215 |
|
|
1 |
|
2017-01-11 |
Alastair Bridgewater |
|
New |
nvc0: support for GP10B |
1 |
|
|
|
2017-03-30 |
Alexandre Courbot |
|
New |
[15/15] core: recognise GP10B chipset |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[14/15] platform: support for probing GP10B |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[13/15] platform: make VDD regulator optional |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[12/15] gr: support for GP10B |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[11/15] ibus: add GP10B support |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[10/15] mc: add GP10B support |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[09/15] fb: add GP10B support |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[08/15] fifo: add GP10B support |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[07/15] msgqueue: support for GP10B PMU firmware |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[06/15] secboot: add GP10B support |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[05/15] secboot/gm20b: specify MC base address as argument |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[04/15] secboot: start LS firmware in post-run hook |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[03/15] secboot: let LS post_run hooks return error |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[02/15] secboot: pass instance to LS firmware loaders |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
[01/15] secboot: allow to boot multiple falcons |
|
|
|
|
2017-03-29 |
Alexandre Courbot |
|
New |
secboot: fix inconsistent pointer checking |
|
|
|
|
2017-03-15 |
Alexandre Courbot |
|
New |
secboot: fix NULL pointer dereference |
|
|
|
|
2017-03-10 |
Alexandre Courbot |
|
New |
[v5,18/18] secboot: clear halt interrupt after ACR is run |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,17/18] falcon: add clear_interrupt function |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,16/18] secboot: add lazy-bootstrap flag |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,15/18] secboot: fix WPR descriptor generation |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,14/18] secboot: set default error value in error register |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,13/18] secboot: add missing fields to BL structure |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,12/18] secboot: safer zeroing of BL descriptors |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,11/18] secboot: abstract LS firmware loading functions |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,10/18] secboot: remove ls_ucode_mgr |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,9/18] secboot: remove unneeded ls_ucode_img member |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,8/18] secboot: disable falcon interrupts when running blob |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,7/18] secboot: split reset function |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,6/18] secboot: add LS flags to LS func structure |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,5/18] secboot: reorganize into more files |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,4/18] secboot: generate HS BL descriptor in hook |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,3/18] secboot: add low-secure firmware hooks |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,2/18] secboot: remove fixup_hs_desc hook |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v5,1/18] secboot: rename init() hook to oneinit() |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
fix build error with out-of-tree builds |
|
|
|
|
2016-12-14 |
Alexandre Courbot |
|
New |
[v2,15/15] secboot: remove nvkm_secboot_start() |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,14/15] gr/gf100: instantiate and reserve GR falcons |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,13/15] gr/gf100: split gf100_gr_init_ctxctl() |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,12/15] gr: add fini() hook |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,11/15] secboot: use falcon library |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,10/15] secboot: fix functions definitions |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,9/15] gm20b: add dummy PMU device |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,8/15] pmu/gk20a: use falcon library functions |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,7/15] pmu/gk20a: simplify code a bit |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,6/15] pmu/gk20a: use nvkm_pmu_ctor() |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,5/15] pmu: add nvkm_pmu_ctor() function |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,4/15] pmu: instanciate the falcon in PMU device |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,3/15] core: add falcon library functions |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |
[v2,2/15] mc: add nvkm_mc_enabled() function |
|
|
|
|
2016-12-13 |
Alexandre Courbot |
|
New |