[v4,4/4] drm: bridge: anx78xx: Add anx78xx driver support.

Submitted by Enric Balletbo i Serra on April 18, 2016, 11:26 a.m.

Details

Message ID 1460978772-7569-5-git-send-email-enric.balletbo@collabora.com
State New, archived
Headers show
Series "Add ANX7814 I2C bridge driver" ( rev: 4 ) in DRI devel

Not browsing as part of any series.

Commit Message

Enric Balletbo i Serra April 18, 2016, 11:26 a.m.
Although there are other chips from the same family that can reuse this
driver, at the moment we only tested ANX7814 chip.

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices. This driver adds initial support for HDMI
to DP pass-through mode.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
---
Changes since v3:
 - Thierry Reding:
   - Add vendor name on symbols and files
   - Remove <linux/async.h> include
   - Improve anx78xx_aux_wait code (remove atomic case)
   - Fix msg->reply handling
   - Capitalize HPD/HDMI/DP
   - Don't return -EAGAIN on link training
   - Use symbolic constants defined instead of magic numbers
   - Move connector_to_anx78xx after the anx78xx declaration
   - Improve some coding style
     - Give the first parameter the proper name (irq)
     - Leave out the tab-padding in anx78xx_bridge_funcs
     - Put bridge_to_anx78xx together with the connector cast function.
      - The structure name should start in the first column
   - Remove messages for connector status changes
   - Free the EDID on unplug instead of on plug event
   - Use unsigned int for i in for loops.
   - Model v10 as regulator.
   - Remove the use of OR'ed errors
   - Simply pass adjusted_mode in bridge mode set.
   - Remove bridge_enable/disable mutex protection, not needed.
   - There's no need to set ->edid to NULL when remove the driver.

Changes since v2:
 - Nicolas Boichat:
   - Get rid of wait_for macro since is only used once.
   - Do not replace the error code if it's readily available to you.
 - Add Tested-by: Nicolas Boichat <drinkcat@chromium.org>
 - Add Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>

Changes since v1:
 - Dan Carpenter: 
   - Fix missing error code
   - Use meaningful names for goto exit paths
 - Rob Herring: 
   - Use hpd instead cable_det as is the more standard name.
 - Daniel Kurtz: 
   - Use regmap_bulk in aux_transfer
   - Fix gpio reset polarity.
   - Turn off v10 last so we mirror poweron sequence
   - Fix some error paths.
   - Remove mutex in anx78xx_detect
 - kbuild:
   - WARNING: PTR_ERR_OR_ZERO can be used


 drivers/gpu/drm/bridge/Kconfig            |   10 +
 drivers/gpu/drm/bridge/Makefile           |    1 +
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 1499 +++++++++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix-anx78xx.h |  719 ++++++++++++++
 4 files changed, 2229 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/analogix-anx78xx.c
 create mode 100644 drivers/gpu/drm/bridge/analogix-anx78xx.h

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 27e2022..f646b2e 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -7,6 +7,16 @@  config DRM_BRIDGE
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
+config DRM_ANALOGIX_ANX78XX
+	tristate "Analogix ANX78XX bridge"
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	---help---
+	  ANX78XX is an ultra-low Full-HD SlimPort transmitter
+	  designed for portable devices. The ANX78XX transforms
+	  the HDMI output of an application processor to MyDP
+	  or DisplayPort.
+
 config DRM_DW_HDMI
 	tristate
 	select DRM_KMS_HELPER
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index f13c33d..62c2251 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,6 @@ 
 ccflags-y := -Iinclude/drm
 
+obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
new file mode 100644
index 0000000..6cfbbf6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -0,0 +1,1499 @@ 
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+
+#include "analogix-anx78xx.h"
+
+#define I2C_NUM_ADDRESSES	5
+#define I2C_IDX_TX_P0		0
+#define I2C_IDX_TX_P1		1
+#define I2C_IDX_TX_P2		2
+#define I2C_IDX_RX_P0		3
+#define I2C_IDX_RX_P1		4
+
+#define XTAL_CLK		270 /* 27M */
+#define AUX_CH_BUFFER_SIZE	16
+#define AUX_WAIT_TIMEOUT_MS	15
+
+static const u8 anx78xx_i2c_addresses[] = {
+	[I2C_IDX_TX_P0] = TX_P0,
+	[I2C_IDX_TX_P1] = TX_P1,
+	[I2C_IDX_TX_P2] = TX_P2,
+	[I2C_IDX_RX_P0] = RX_P0,
+	[I2C_IDX_RX_P1] = RX_P1,
+};
+
+struct anx78xx_platform_data {
+	struct regulator *dvdd10;
+	struct gpio_desc *gpiod_hpd;
+	struct gpio_desc *gpiod_pd;
+	struct gpio_desc *gpiod_reset;
+
+	int hpd_irq;
+	int intp_irq;
+};
+
+struct anx78xx {
+	struct drm_dp_aux aux;
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct edid *edid;
+	struct drm_connector connector;
+	struct drm_dp_link link;
+	struct anx78xx_platform_data pdata;
+	struct mutex lock;
+
+	/*
+	 * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2,
+	 * RX_P0 and RX_P1.
+	 */
+	struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES];
+	struct regmap *map[I2C_NUM_ADDRESSES];
+
+	u16 chipid;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+	bool powered;
+};
+
+static inline struct anx78xx *connector_to_anx78xx(struct drm_connector *c)
+{
+	return container_of(c, struct anx78xx, connector);
+}
+
+static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx78xx, bridge);
+}
+
+static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static bool anx78xx_aux_op_finished(struct anx78xx *anx78xx)
+{
+	int err;
+	unsigned int aux_ctrl;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+			  &aux_ctrl);
+	if (err || (aux_ctrl & SP_AUX_EN))
+		return false;
+
+	return true;
+}
+
+static int anx78xx_aux_wait(struct anx78xx *anx78xx)
+{
+	int err;
+	unsigned int status;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
+	while (!anx78xx_aux_op_finished(anx78xx)) {
+		if (time_after(jiffies, timeout)) {
+			if (!anx78xx_aux_op_finished(anx78xx)) {
+				DRM_ERROR("Timed out waiting AUX to finish\n");
+				return -ETIMEDOUT;
+			}
+			break;
+		}
+		usleep_range(1000, 2000);
+	}
+
+	/* Read the AUX channel access status */
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
+			  &status);
+	if (err || (status & SP_AUX_STATUS)) {
+		DRM_ERROR("Failed to read AUX channel: 0x%02x (err: %d)\n",
+			  status, err);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
+{
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
+			   addr & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
+			   (addr & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	/*
+	 * DP AUX CH Address Register #2, only update bits[3:0]
+	 * [7:4] RESERVED
+	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+	 */
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_AUX_ADDR_19_16_REG,
+				 SP_AUX_ADDR_19_16_MASK,
+				 (addr & 0xf0000) >> 16);
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	int err;
+	struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
+	u8 ctrl1 = msg->request;
+	u8 ctrl2 = SP_AUX_EN;
+	u8 *buffer = msg->buffer;
+
+	/* The DP AUX transmit and receive buffer has 16 bytes. */
+	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
+		return -E2BIG;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		ctrl2 |= SP_ADDR_ONLY;
+	else	/* For non-zero-sized set the length field. */
+		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
+
+	if ((msg->request & DP_AUX_I2C_READ) == 0) {
+		/* When WRITE | MOT write values to data buffer */
+		err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
+					SP_DP_BUF_DATA0_REG, buffer,
+					msg->size);
+		if (err)
+			return err;
+	}
+
+	/* Write address and request */
+	err = anx78xx_aux_address(anx78xx, msg->address);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
+			   ctrl1);
+	if (err)
+		return err;
+
+	/* Start transaction */
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
+				 SP_AUX_EN, ctrl2);
+	if (err)
+		return err;
+
+	err = anx78xx_aux_wait(anx78xx);
+	if (err)
+		return err;
+
+	msg->reply = DP_AUX_I2C_REPLY_ACK;
+
+	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
+		/* Read values from data buffer */
+		err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
+				       SP_DP_BUF_DATA0_REG, buffer,
+				       msg->size);
+		if (err)
+			return err;
+	}
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
+	if (err)
+		return err;
+
+	return msg->size;
+}
+
+static int anx78xx_set_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+			       SP_HPD_OUT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_clear_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+				 SP_HPD_OUT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence tmds_phy_initialization[] = {
+	{ SP_TMDS_CTRL_BASE + 1, 0x90 },
+	{ SP_TMDS_CTRL_BASE + 2, 0xa9 },
+	{ SP_TMDS_CTRL_BASE + 6, 0x92 },
+	{ SP_TMDS_CTRL_BASE + 7, 0x80 },
+	{ SP_TMDS_CTRL_BASE + 20, 0xf2 },
+	{ SP_TMDS_CTRL_BASE + 22, 0xc4 },
+	{ SP_TMDS_CTRL_BASE + 23, 0x18 },
+};
+
+static int anx78xx_rx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   SP_AUD_MUTE | SP_VID_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG,
+			       SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN |
+			       SP_DIGITAL_CKDT_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+			       SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+				 SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	/* Sync detect change, GP set mute */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) |
+			       BIT(6));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 3,
+			       SP_AEC_EN21);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG,
+			       SP_AVC_EN | SP_AAC_OE | SP_AAC_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT);
+	if (err)
+		return err;
+
+	/* Enable DDC stretch */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR);
+	if (err)
+		return err;
+
+	/* TMDS phy initialization */
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0],
+				     tmds_phy_initialization,
+				     ARRAY_SIZE(tmds_phy_initialization));
+	if (err)
+		return err;
+
+	err = anx78xx_clear_hpd(anx78xx);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const u8 dp_tx_output_precise_tune_bits[20] = {
+	0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
+	0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
+	0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
+};
+
+static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * REVISIT : It is writing to a RESERVED bits in Analog Control 0
+	 * register.
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG,
+			   0x02);
+	if (err)
+		return err;
+
+	/*
+	 * Write DP TX output emphasis precise tune bits.
+	 */
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1],
+				SP_DP_TX_LT_CTRL0_REG,
+				dp_tx_output_precise_tune_bits,
+				ARRAY_SIZE(dp_tx_output_precise_tune_bits));
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx)
+{
+	int err;
+	unsigned int regval;
+
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_ANALOG_DEBUG2_REG,
+				 SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
+				 SP_XTAL_FRQ_27M);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG,
+			   XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG,
+			   ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER1_REG,
+			   (XTAL_CLK & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG,
+			   XTAL_CLK / 10 - 1);
+	if (err)
+		return err;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+			  SP_HDMI_US_TIMER_CTRL_REG,
+			  &regval);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0],
+			   SP_HDMI_US_TIMER_CTRL_REG,
+			   (regval & SP_MS_TIMER_MARGIN_10_8_MASK) |
+			   ((((XTAL_CLK / 10) >> 1) - 2) << 3));
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence otp_key_protect[] = {
+	{ SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 },
+	{ SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 },
+	{ SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 },
+};
+
+static int anx78xx_tx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Set terminal resistor to 50 ohm */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+			   0x30);
+	if (err)
+		return err;
+
+	/* Enable aux double diff output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_AUX_CH_CTRL2_REG, 0x08);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_HDCP_CTRL_REG, SP_AUTO_EN |
+				 SP_AUTO_START);
+	if (err)
+		return err;
+
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0],
+				     otp_key_protect,
+				     ARRAY_SIZE(otp_key_protect));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG,
+			   SP_VID_VRES_TH);
+	if (err)
+		return err;
+
+	/*
+	 * DP HDCP auto authentication wait timer (when downstream starts to
+	 * auth, DP side will wait for this period then do auth automatically)
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG,
+			   0x00);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2],
+			       SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS);
+	if (err)
+		return err;
+
+	err = anx78xx_xtal_clk_sel(anx78xx);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG,
+			   SP_DEFER_CTRL_EN | 0x0c);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_POLLING_CTRL_REG,
+			       SP_AUTO_POLLING_DISABLE);
+	if (err)
+		return err;
+
+	/*
+	 * Short the link integrity check timer to speed up bstatus
+	 * polling for HDCP CTS item 1A-07
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP);
+	if (err)
+		return err;
+
+	/* Power down the main link by default */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	err = anx78xx_link_phy_initialization(anx78xx);
+	if (err)
+		return err;
+
+	/* Gen m_clk with downspreading */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_enable_interrupts(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * BIT0: INT pin assertion polarity: 1 = assert high
+	 * BIT1: INT pin output type: 0 = push/pull
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG,
+			   SP_TRAINING_FINISH);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG,
+			   SP_CKDT_CHG | SP_SCDT_CHG);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void anx78xx_poweron(struct anx78xx *anx78xx)
+{
+	int err;
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+	if (WARN_ON(anx78xx->powered))
+		return;
+
+	if (pdata->dvdd10) {
+		err = regulator_enable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to enable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+
+	/* Power on registers module */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			   SP_REGISTER_PD | SP_TOTAL_PD);
+
+	anx78xx->powered = true;
+}
+
+static void anx78xx_poweroff(struct anx78xx *anx78xx)
+{
+	int err;
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
+	usleep_range(1000, 2000);
+
+	if (pdata->dvdd10) {
+		err = regulator_disable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to disable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	anx78xx->powered = false;
+}
+
+static int anx78xx_start(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Power on all modules */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD |
+				 SP_LINK_PD);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_rx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed receiver initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_tx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed transmitter initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	/*
+	 * This delay seems to help keep the hardware in a good state. Without
+	 * it, there are times where it fails silently.
+	 */
+	usleep_range(10000, 15000);
+
+	return 0;
+
+err_poweroff:
+	DRM_ERROR("Failed SlimPort transmitter initialization: %d\n", err);
+	anx78xx_poweroff(anx78xx);
+
+	return err;
+}
+
+static int anx78xx_init_pdata(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+	/* 1.0V digital core power regulator (optional) */
+	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
+	if (IS_ERR(pdata->dvdd10)) {
+		DRM_INFO("DVDD10 regulator not found\n");
+		pdata->dvdd10 = NULL;
+	}
+
+	/* GPIO for HPD */
+	pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN);
+	if (IS_ERR(pdata->gpiod_hpd))
+		return PTR_ERR(pdata->gpiod_hpd);
+
+	/* GPIO for chip power down */
+	pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(pdata->gpiod_pd))
+		return PTR_ERR(pdata->gpiod_pd);
+
+	/* GPIO for chip reset */
+	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+
+	return PTR_ERR_OR_ZERO(pdata->gpiod_reset);
+}
+
+static int anx78xx_dp_link_training(struct anx78xx *anx78xx)
+{
+	int err;
+	u8 dp_bw, regval;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   0x0);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_TOTAL_PD);
+	if (err)
+		return err;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw);
+	if (err < 0)
+		return err;
+
+	switch (dp_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+	case DP_LINK_BW_5_4:
+		break;
+	default:
+		DRM_DEBUG_KMS("DP bandwidth (0x%02x) not supported\n", dp_bw);
+		return -EINVAL;
+	}
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Get DPCD info */
+	err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV,
+			       &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE);
+	if (err < 0) {
+		DRM_ERROR("Failed to read DPCD: %d\n", err);
+		return err;
+	}
+
+	/* Clear channel x SERDES power down */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	/* Check link capabilities */
+	err = drm_dp_link_probe(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to probe link capabilities: %d\n", err);
+		return err;
+	}
+
+	/* Power up the sink */
+	err = drm_dp_link_power_up(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to power up DisplayPort link: %d\n", err);
+		return err;
+	}
+
+	/* Possibly enable downspread on the sink */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+	if (err)
+		return err;
+
+	if (anx78xx->dpcd[DP_MAX_DOWNSPREAD] & DP_PERCENT_DOWNSPREAD_0_5) {
+		DRM_DEBUG("Enable downspread on the sink\n");
+		/* 4000PPM */
+		err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+		if (err)
+			return err;
+
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL,
+					 DP_SPREAD_AMP_0_5);
+		if (err < 0)
+			return err;
+	} else {
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set the lane count and the link rate on the sink */
+	if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
+		err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+				       SP_DP_SYSTEM_CTRL_BASE + 4,
+				       SP_ENHANCED_MODE);
+	else
+		err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+					 SP_DP_SYSTEM_CTRL_BASE + 4,
+					 SP_ENHANCED_MODE);
+	if (err)
+		return err;
+
+	regval = drm_dp_link_rate_to_bw_code(anx78xx->link.rate);
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_MAIN_LINK_BW_SET_REG, regval);
+	if (err)
+		return err;
+
+	err = drm_dp_link_configure(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to configure DisplayPort link: %d\n", err);
+		return err;
+	}
+
+	/* Start training on the source */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG,
+			   SP_LT_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_config_dp_output(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+				 SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	/* Enable DP output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx,
+					struct hdmi_avi_infoframe *frame)
+{
+	int err;
+	u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
+
+	err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer));
+	if (err < 0) {
+		DRM_ERROR("Failed to pack AVI infoframe: %d\n", err);
+		return err;
+	}
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2],
+				SP_INFOFRAME_AVI_DB1_REG, buffer,
+				frame->length);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_get_downstream_info(struct anx78xx *anx78xx)
+{
+	int err;
+	u8 regval;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, &regval);
+	if (err < 0) {
+		DRM_ERROR("Get sink count failed %d\n", err);
+		return err;
+	}
+
+	if (!DP_GET_SINK_COUNT(regval)) {
+		DRM_ERROR("Downstream disconnected\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx78xx_get_modes(struct drm_connector *connector)
+{
+	int err, num_modes = 0;
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+	if (WARN_ON(!anx78xx->powered))
+		return 0;
+
+	if (anx78xx->edid)
+		return drm_add_edid_modes(connector, anx78xx->edid);
+
+	mutex_lock(&anx78xx->lock);
+
+	err = anx78xx_get_downstream_info(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to get downstream info: %d\n", err);
+		goto unlock;
+	}
+
+	anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc);
+	if (!anx78xx->edid) {
+		DRM_ERROR("Failed to read edid\n");
+		goto unlock;
+	}
+
+	err = drm_mode_connector_update_edid_property(connector,
+						      anx78xx->edid);
+	if (err) {
+		DRM_ERROR("Failed to update edid property: %d\n", err);
+		goto unlock;
+	}
+
+	num_modes = drm_add_edid_modes(connector, anx78xx->edid);
+	/* Store the ELD */
+	drm_edid_to_eld(connector, anx78xx->edid);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	return num_modes;
+}
+
+static struct drm_encoder *anx78xx_best_encoder(struct drm_connector *connector)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+	return anx78xx->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs anx78xx_connector_helper_funcs = {
+	.get_modes = anx78xx_get_modes,
+	.best_encoder = anx78xx_best_encoder,
+};
+
+static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
+						bool force)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		return connector_status_disconnected;
+
+	return connector_status_connected;
+}
+
+static void anx78xx_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs anx78xx_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = anx78xx_detect,
+	.destroy = anx78xx_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx78xx_bridge_attach(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	int err;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	/* Register aux channel */
+	anx78xx->aux.name = "DP-AUX";
+	anx78xx->aux.dev = &anx78xx->client->dev;
+	anx78xx->aux.transfer = anx78xx_aux_transfer;
+
+	err = drm_dp_aux_register(&anx78xx->aux);
+	if (err < 0) {
+		DRM_ERROR("Failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	err = drm_connector_init(bridge->dev, &anx78xx->connector,
+				 &anx78xx_connector_funcs,
+				 DRM_MODE_CONNECTOR_DisplayPort);
+	if (err) {
+		DRM_ERROR("Failed to initialize connector: %d\n", err);
+		return err;
+	}
+
+	drm_connector_helper_add(&anx78xx->connector,
+				 &anx78xx_connector_helper_funcs);
+
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
+	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	err = drm_mode_connector_attach_encoder(&anx78xx->connector,
+						bridge->encoder);
+	if (err) {
+		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return false;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return false;
+
+	return true;
+}
+
+static void anx78xx_bridge_disable(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	/* Power off all modules except configuration registers access */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+}
+
+static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode)
+{
+	int err;
+	struct hdmi_avi_infoframe frame;
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = drm_hdmi_avi_infoframe_from_display_mode(&frame, adjusted_mode);
+	if (err) {
+		DRM_ERROR("Failed to setup AVI infoframe: %d\n", err);
+		goto unlock;
+	}
+
+	err = anx78xx_send_video_infoframe(anx78xx, &frame);
+	if (err)
+		DRM_ERROR("Failed to send AVI infoframe: %d\n", err);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+}
+
+static void anx78xx_bridge_enable(struct drm_bridge *bridge)
+{
+	int err;
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	err = anx78xx_start(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to initialize: %d\n", err);
+		return;
+	}
+
+	err = anx78xx_set_hpd(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to set HPD: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
+	.attach = anx78xx_bridge_attach,
+	.mode_fixup = anx78xx_bridge_mode_fixup,
+	.disable = anx78xx_bridge_disable,
+	.mode_set = anx78xx_bridge_mode_set,
+	.enable = anx78xx_bridge_enable,
+};
+
+static irqreturn_t anx78xx_hpd_threaded_handler(int irq, void *data)
+{
+	int err;
+	struct anx78xx *anx78xx = data;
+
+	if (anx78xx->powered)
+		return IRQ_HANDLED;
+
+	mutex_lock(&anx78xx->lock);
+
+	/* Cable is pulled, power on the chip */
+	anx78xx_poweron(anx78xx);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+
+	mutex_unlock(&anx78xx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	int err;
+
+	DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			   irq);
+	if (err)
+		return err;
+
+	if (irq & SP_TRAINING_FINISH) {
+		DRM_DEBUG_KMS("IRQ: hardware link training finished\n");
+		err = anx78xx_config_dp_output(anx78xx);
+	}
+
+	return err;
+}
+
+static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq)
+{
+	int err;
+	bool event = false;
+
+	DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_STATUS4_REG, irq);
+	if (err) {
+		DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err);
+		return event;
+	}
+
+	if (irq & SP_HPD_LOST) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n");
+		event = true;
+		anx78xx_poweroff(anx78xx);
+		/* Free cached EDID */
+		kfree(anx78xx->edid);
+		anx78xx->edid = NULL;
+	} else if (irq & SP_HPD_PLUG) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n");
+		event = true;
+	}
+
+	return event;
+}
+
+static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	int err;
+	unsigned int regval;
+
+	DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			   irq);
+	if (err) {
+		DRM_ERROR("Write HDMI int 1 failed %d\n", err);
+		return;
+	}
+
+	if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) {
+		DRM_DEBUG_KMS("IRQ: HDMI input detected\n");
+		err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+				  SP_SYSTEM_STATUS_REG, &regval);
+		if (err) {
+			DRM_ERROR("Read system status reg failed %d\n", err);
+			return;
+		}
+
+		if (!(regval & SP_TMDS_CLOCK_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n");
+			return;
+		}
+		if (!(regval & SP_TMDS_DE_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n");
+			return;
+		}
+
+		err = anx78xx_dp_link_training(anx78xx);
+		if (err)
+			DRM_ERROR("Failed to start link training: %d\n", err);
+	}
+}
+
+static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data)
+{
+	struct anx78xx *anx78xx = data;
+	int err;
+	unsigned int irq;
+	bool event = false;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			  &irq);
+	if (err) {
+		DRM_ERROR("Failed to read DP int 1 status %d\n", err);
+		goto unlock;
+	} else if (irq) {
+		anx78xx_handle_dp_int_1(anx78xx, irq);
+	}
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2],
+			  SP_COMMON_INT_STATUS4_REG, &irq);
+	if (err) {
+		DRM_ERROR("Failed to read common int 4 status %d\n", err);
+		goto unlock;
+	} else if (irq) {
+		event = anx78xx_handle_common_int_4(anx78xx, irq);
+	}
+
+	/* Make sure we are still powered after handle HPD events */
+	if (!anx78xx->powered)
+		goto unlock;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			  &irq);
+	if (err)
+		DRM_ERROR("Failed to read HDMI int 1 status %d\n", err);
+	else if (irq)
+		anx78xx_handle_hdmi_int_1(anx78xx, irq);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	if (event)
+		drm_helper_hpd_irq_event(anx78xx->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++)
+		if (anx78xx->i2c_dummy[i])
+			i2c_unregister_device(anx78xx->i2c_dummy[i]);
+}
+
+static const struct regmap_config anx78xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const u16 anx78xx_chipid_list[] = {
+	0x7812,
+	0x7814,
+	0x7818,
+};
+
+static int anx78xx_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx78xx *anx78xx;
+	struct anx78xx_platform_data *pdata;
+	int err;
+	unsigned int i, idl, idh, version;
+	bool found = false;
+
+	anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
+	if (!anx78xx)
+		return -ENOMEM;
+
+	pdata = &anx78xx->pdata;
+
+	mutex_init(&anx78xx->lock);
+
+#if IS_ENABLED(CONFIG_OF)
+	anx78xx->bridge.of_node = client->dev.of_node;
+#endif
+
+	anx78xx->client = client;
+	i2c_set_clientdata(client, anx78xx);
+
+	err = anx78xx_init_pdata(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to initialize pdata: %d\n", err);
+		return err;
+	}
+
+	pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd);
+	if (pdata->hpd_irq < 0) {
+		DRM_ERROR("Failed to get HPD irq %d\n",
+			  pdata->hpd_irq);
+		return -ENODEV;
+	}
+
+	pdata->intp_irq = client->irq;
+	if (!pdata->intp_irq) {
+		DRM_ERROR("Failed to get CABLE_DET and INTP irq\n");
+		return -ENODEV;
+	}
+
+	/* Map slave addresses of ANX7814 */
+	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+		anx78xx->i2c_dummy[i] = i2c_new_dummy(client->adapter,
+						anx78xx_i2c_addresses[i] >> 1);
+		if (!anx78xx->i2c_dummy[i]) {
+			err = -ENOMEM;
+			DRM_ERROR("Failed to reserve i2c bus %02x.\n",
+				  anx78xx_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+
+		anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i],
+						       &anx78xx_regmap_config);
+		if (IS_ERR(anx78xx->map[i])) {
+			err = PTR_ERR(anx78xx->map[i]);
+			DRM_ERROR("Failed regmap initialization %02x.\n",
+				  anx78xx_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+	}
+
+	/* Look for supported chip id */
+	anx78xx_poweron(anx78xx);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG,
+			  &idl);
+	if (err)
+		goto err_poweroff;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG,
+			  &idh);
+	if (err)
+		goto err_poweroff;
+
+	anx78xx->chipid = (u8)idl | ((u8)idh << 8);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG,
+			  &version);
+	if (err)
+		goto err_poweroff;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) {
+		if (anx78xx->chipid == anx78xx_chipid_list[i]) {
+			DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n",
+				 anx78xx->chipid, version);
+			found = true;
+			break;
+		}
+	}
+
+	if (!found) {
+		DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+			  anx78xx->chipid, version);
+		err = -ENODEV;
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq,
+					NULL,
+					anx78xx_hpd_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-hpd", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request CABLE_DET threaded irq: %d\n",
+			  err);
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL,
+					anx78xx_intp_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-intp", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request INTP threaded irq: %d\n", err);
+		goto err_poweroff;
+	}
+
+	anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
+	err = drm_bridge_add(&anx78xx->bridge);
+	if (err < 0) {
+		DRM_ERROR("Failed to add drm bridge: %d\n", err);
+		goto err_poweroff;
+	}
+
+	/* If cable is pulled out, just poweroff and wait for HPD event */
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		anx78xx_poweroff(anx78xx);
+
+	return 0;
+
+err_poweroff:
+	anx78xx_poweroff(anx78xx);
+
+err_unregister_i2c:
+	unregister_i2c_dummy_clients(anx78xx);
+	return err;
+}
+
+static int anx78xx_i2c_remove(struct i2c_client *client)
+{
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx78xx->bridge);
+
+	unregister_i2c_dummy_clients(anx78xx);
+
+	kfree(anx78xx->edid);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx78xx_id[] = {
+	{"anx7814", 0},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(i2c, anx78xx_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx78xx_match_table[] = {
+	{.compatible = "analogix,anx7814",},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx78xx_match_table);
+#endif
+
+static struct i2c_driver anx78xx_driver = {
+	.driver = {
+		   .name = "anx7814",
+		   .of_match_table = of_match_ptr(anx78xx_match_table),
+		  },
+	.probe = anx78xx_i2c_probe,
+	.remove = anx78xx_i2c_remove,
+	.id_table = anx78xx_id,
+};
+
+module_i2c_driver(anx78xx_driver);
+
+MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver");
+MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h
new file mode 100644
index 0000000..38753c8
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.h
@@ -0,0 +1,719 @@ 
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#define TX_P0				0x70
+#define TX_P1				0x7a
+#define TX_P2				0x72
+
+#define RX_P0				0x7e
+#define RX_P1				0x80
+
+/***************************************************************/
+/* Register definition of device address 0x7e                  */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG		0x11
+#define SP_VIDEO_RST			BIT(4)
+#define SP_HDCP_MAN_RST			BIT(2)
+#define SP_TMDS_RST			BIT(1)
+#define SP_SW_MAN_RST			BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG		0x14
+#define SP_TMDS_CLOCK_DET		BIT(1)
+#define SP_TMDS_DE_DET			BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG		0x15
+#define SP_HDMI_AUD_LAYOUT		BIT(3)
+#define SP_HDMI_DET			BIT(0)
+#  define SP_DVI_MODE			0
+#  define SP_HDMI_MODE			1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG		0x16
+#define SP_AUD_MUTE			BIT(1)
+#define SP_VID_MUTE			BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG	0x18
+#define SP_PWDN_CTRL			BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG		0x20
+#define SP_AVC_OE			BIT(7)
+#define SP_AAC_OE			BIT(6)
+#define SP_AVC_EN			BIT(1)
+#define SP_AAC_EN			BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21			BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG		0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI			BIT(7)
+#define SP_CKDT_CHG			BIT(6)
+#define SP_SCDT_CHG			BIT(5)
+#define SP_PCLK_CHG			BIT(4)
+#define SP_PLL_UNLOCK			BIT(3)
+#define SP_CABLE_PLUG_CHG		BIT(2)
+#define SP_SET_MUTE			BIT(1)
+#define SP_SW_INTR			BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR			BIT(5)
+#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG			BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV			BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_INT_STATUS6_REG		0x36
+#define SP_CTS_RCV			BIT(7)
+#define SP_NEW_AUD_PKT			BIT(4)
+#define SP_NEW_AVI_PKT			BIT(1)
+#define SP_NEW_CP_PKT			BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI			BIT(7)
+#define SP_NEW_VS			BIT(4)
+
+/* Interrupt Mask 1 Status Registers */
+#define SP_INT_MASK1_REG		0x41
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG	0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE		(0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT			BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG		0x70
+#define SP_COLOR_DEPTH_MASK		0xf0
+#define SP_COLOR_DEPTH_SHIFT		4
+#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
+#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
+#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
+#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
+#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG	0x83
+#define SP_R2Y_INPUT_LIMIT		BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM	6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK			0x0f
+#  define SP_FS_FREQ_44100HZ		0x00
+#  define SP_FS_FREQ_48000HZ		0x02
+#  define SP_FS_FREQ_32000HZ		0x03
+#  define SP_FS_FREQ_88200HZ		0x08
+#  define SP_FS_FREQ_96000HZ		0x0a
+#  define SP_FS_FREQ_176400HZ		0x0c
+#  define SP_FS_FREQ_192000HZ		0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG		0xe3
+#define SP_MAN_HDMI5V_DET		BIT(3)
+#define SP_PLLLOCK_CKDT_EN		BIT(2)
+#define SP_ANALOG_CKDT_EN		BIT(1)
+#define SP_DIGITAL_CKDT_EN		BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
+#define SP_AVI_RCVD			BIT(5)
+#define SP_VSI_RCVD			BIT(1)
+
+/***************************************************************/
+/* Register definition of device address 0x80                  */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
+#define SP_BCAPS_REPEATER		BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG		0x3f
+#define SP_AUTH_EN			BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
+
+#define SP_AVI_COLOR_F_MASK		0x60
+#define SP_AVI_COLOR_F_SHIFT		5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG	0x9f
+#define SP_CLEAR_AVMUTE			BIT(4)
+#define SP_SET_AVMUTE			BIT(0)
+
+/***************************************************************/
+/* Register definition of device address 0x70                  */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_STRM_VALID			BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+/***************************************************************/
+/* Register definition of device address 0x72                  */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+/***************************************************************/
+/* Register definition of device address 0x7a                  */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG		0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
+#define SP_AUD_INTERFACE_DISABLE	0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG	0x60
+#define SP_M_AUD_ADJUST_ST		0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG	0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG	0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG	0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG	0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG			0xb7
+
+#endif