[08/14] drm/i915/tdr: Add support for per engine reset recovery

Submitted by arun.siluvery@linux.intel.com on April 12, 2016, 4:59 p.m.

Details

Message ID 1460480381-8777-9-git-send-email-arun.siluvery@linux.intel.com
State New
Headers show
Series "Gen8 Execlist based Engine reset and recovery support" ( rev: 1 ) in Intel GFX

Not browsing as part of any series.

Commit Message

arun.siluvery@linux.intel.com April 12, 2016, 4:59 p.m.
This change implements support for per-engine reset as an initial, less
intrusive hang recovery option to be attempted before falling back to the
legacy full GPU reset recovery mode if necessary. This is only supported
from Gen8 onwards.

Hangchecker determines which engines are hung and invokes error handler to
recover from it. Error handler schedules recovery for each of those engines
that are hung. The recovery procedure is as follows,
 - force engine to idle: this is done by issuing a reset request
 - save current state which includes head and current request
 - reset engine
 - restore saved state and resubmit context

If engine reset fails then we fall back to heavy weight full gpu reset
which resets all engines and reinitiazes complete state of HW and SW.

Possible reasons for failure,
 - engine not ready for reset
 - if the HW and SW doesn't agree on the context that caused the hang
 - reset itself failed for some reason

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c     | 54 +++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/i915_drv.h     |  4 +++
 drivers/gpu/drm/i915/i915_gem.c     |  4 +--
 drivers/gpu/drm/i915/intel_uncore.c | 37 +++++++++++++++++++++++++
 4 files changed, 95 insertions(+), 4 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 1933f87..227ad42 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -970,10 +970,60 @@  int i915_reset(struct drm_device *dev)
  */
 int i915_reset_engine(struct intel_engine_cs *engine)
 {
+	struct drm_device *dev = engine->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs_state state;
 	int ret;
 
-	/* FIXME: replace me with engine reset sequence */
-	ret = -ENODEV;
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	i915_gem_reset_engine_status(dev_priv, engine);
+
+	/*Take wake lock to prevent power saving mode */
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	ret = intel_request_for_reset(engine);
+	if (ret) {
+		DRM_ERROR("Failed to disable %s\n", engine->name);
+		goto out;
+	}
+
+	ret = engine->save(engine, &state);
+	if (ret)
+		goto enable_engine;
+
+	ret = intel_gpu_reset(dev, intel_engine_flag(engine));
+	if (ret) {
+		DRM_ERROR("Failed to reset %s, ret=%d\n", engine->name, ret);
+		goto enable_engine;
+	}
+
+	ret = engine->init_hw(engine);
+	if (ret)
+		goto out;
+
+	/*
+	 * Restart the engine after reset.
+	 * Engine state is first restored and the context is resubmitted.
+	 */
+	engine->start(engine, &state);
+
+enable_engine:
+	/*
+	 * we only need to enable engine if we cannot either save engine state
+	 * or reset fails. If the reset is successful, engine gets enabled
+	 * automatically so we can skip this step.
+	 */
+	if (ret)
+		intel_clear_reset_request(engine);
+
+out:
+	if (state.req)
+		i915_gem_request_unreference(state.req);
+
+	/* Wake up anything waiting on this engine's queue */
+	wake_up_all(&engine->irq_queue);
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bb34107..eda531f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2754,6 +2754,8 @@  extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
 			      unsigned long arg);
 #endif
 extern int intel_gpu_reset(struct drm_device *dev, u32 engine_mask);
+extern int intel_request_for_reset(struct intel_engine_cs *engine);
+extern int intel_clear_reset_request(struct intel_engine_cs *engine);
 extern bool intel_has_gpu_reset(struct drm_device *dev);
 extern bool intel_has_engine_reset_support(struct intel_engine_cs *engine);
 extern int i915_reset(struct drm_device *dev);
@@ -3094,6 +3096,8 @@  static inline bool i915_stop_ring_allow_warn(struct drm_i915_private *dev_priv)
 }
 
 void i915_gem_reset(struct drm_device *dev);
+void i915_gem_reset_engine_status(struct drm_i915_private *dev_priv,
+				  struct intel_engine_cs *ring);
 bool i915_gem_clflush_object(struct drm_i915_gem_object *obj, bool force);
 int __must_check i915_gem_init(struct drm_device *dev);
 int i915_gem_init_engines(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5a65a76..4c62583 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2802,8 +2802,8 @@  i915_gem_find_active_request(struct intel_engine_cs *engine)
 	return NULL;
 }
 
-static void i915_gem_reset_engine_status(struct drm_i915_private *dev_priv,
-				       struct intel_engine_cs *engine)
+void i915_gem_reset_engine_status(struct drm_i915_private *dev_priv,
+				  struct intel_engine_cs *engine)
 {
 	struct drm_i915_gem_request *request;
 	bool ring_hung;
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index 9ce2470..3bfda85 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1704,6 +1704,43 @@  int intel_guc_reset(struct drm_i915_private *dev_priv)
 	return ret;
 }
 
+/*
+ * On gen8+ a reset request has to be issued via the reset control register
+ * before a GPU engine can be reset in order to stop the command streamer
+ * and idle the engine. This replaces the legacy way of stopping an engine
+ * by writing to the stop ring bit in the MI_MODE register.
+ */
+int intel_request_for_reset(struct intel_engine_cs *engine)
+{
+	struct drm_device *dev = engine->dev;
+
+	if (!intel_has_engine_reset_support(engine)) {
+		DRM_ERROR("Engine Reset not supported on Gen%d\n",
+			  INTEL_INFO(dev)->gen);
+		return -EINVAL;
+	}
+
+	return gen8_request_engine_reset(engine);
+}
+
+/*
+ * It is possible to back off from a previously issued reset request by simply
+ * clearing the reset request bit in the reset control register.
+ */
+int intel_clear_reset_request(struct intel_engine_cs *engine)
+{
+	struct drm_device *dev = engine->dev;
+
+	if (!intel_has_engine_reset_support(engine)) {
+		DRM_ERROR("Reset unrequest not supported on Gen%d\n",
+			  INTEL_INFO(dev)->gen);
+		return -EINVAL;
+	}
+
+	gen8_unrequest_engine_reset(engine);
+	return 0;
+}
+
 bool intel_uncore_unclaimed_mmio(struct drm_i915_private *dev_priv)
 {
 	return check_for_unclaimed_mmio(dev_priv);