[03/24] drm/i915: clean up intel_sanitize_crtc

Submitted by Maarten Lankhorst on June 1, 2015, 1:27 p.m.

Details

Message ID 1433165247-15928-4-git-send-email-maarten.lankhorst@linux.intel.com
State New
Headers show

Not browsing as part of any series.

Commit Message

Maarten Lankhorst June 1, 2015, 1:27 p.m.
Apply force if needed. During boot pipe_config->active will be false.
On resume no separate modeset is needed when the state gets restored
with the sw state anyway.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  8 ++--
 drivers/gpu/drm/i915/intel_display.c | 84 +++++++++++-------------------------
 drivers/gpu/drm/i915/intel_drv.h     |  2 +-
 3 files changed, 29 insertions(+), 65 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 51fe0fbcd00c..db23916c1875 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3637,7 +3637,7 @@  static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 		bool active = pipe_config->base.active;
 
 		if (active) {
-			intel_crtc_control(&crtc->base, false);
+			intel_crtc_control(&crtc->base, false, false);
 			pipe_config = to_intel_crtc_state(crtc->base.state);
 		}
 
@@ -3647,7 +3647,7 @@  static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
 		if (active)
-			intel_crtc_control(&crtc->base, true);
+			intel_crtc_control(&crtc->base, true, false);
 	}
 	drm_modeset_unlock_all(dev);
 }
@@ -3671,7 +3671,7 @@  static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 		bool active = pipe_config->base.active;
 
 		if (active) {
-			intel_crtc_control(&crtc->base, false);
+			intel_crtc_control(&crtc->base, false, false);
 			pipe_config = to_intel_crtc_state(crtc->base.state);
 		}
 
@@ -3681,7 +3681,7 @@  static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
 					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
 
 		if (active)
-			intel_crtc_control(&crtc->base, true);
+			intel_crtc_control(&crtc->base, true, false);
 	}
 	drm_modeset_unlock_all(dev);
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0f031658a297..8e9afc55c284 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6192,7 +6192,7 @@  free:
 }
 
 /* Master function to enable/disable CRTC and corresponding power wells */
-int intel_crtc_control(struct drm_crtc *crtc, bool enable)
+int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_mode_config *config = &dev->mode_config;
@@ -6202,10 +6202,13 @@  int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 	struct drm_atomic_state *state;
 	int ret;
 
-	if (enable == intel_crtc->active)
+	if (WARN_ON(active && force))
+		return -EINVAL;
+
+	if (active == intel_crtc->active)
 		return 0;
 
-	if (enable && !crtc->state->enable)
+	if (active && !crtc->state->enable)
 		return 0;
 
 	/* this function should be called with drm_modeset_lock_all for now */
@@ -6225,7 +6228,9 @@  int intel_crtc_control(struct drm_crtc *crtc, bool enable)
 		ret = PTR_ERR(pipe_config);
 		goto err;
 	}
-	pipe_config->base.active = enable;
+	pipe_config->base.active = active;
+	if (force)
+		pipe_config->base.enable = false;
 
 	ret = intel_set_mode(state);
 	if (!ret)
@@ -6249,7 +6254,7 @@  void intel_crtc_update_dpms(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
 		enable |= intel_encoder->connectors_active;
 
-	intel_crtc_control(crtc, enable);
+	intel_crtc_control(crtc, enable, false);
 }
 
 void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -14812,11 +14817,14 @@  intel_check_plane_mapping(struct intel_crtc *crtc)
 	return true;
 }
 
-static void intel_sanitize_crtc(struct intel_crtc *crtc)
+static void intel_sanitize_crtc(struct intel_crtc *crtc,
+				struct intel_crtc_state *pipe_config)
 {
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder;
 	u32 reg;
+	bool enable;
 
 	/* Clear any frame start delays used for debugging left by the BIOS */
 	reg = PIPECONF(crtc->config->cpu_transcoder);
@@ -14833,7 +14841,6 @@  static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	 * disable the crtc (and hence change the state) if it is wrong. Note
 	 * that gen4+ has a fixed plane -> pipe mapping.  */
 	if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
-		struct intel_connector *connector;
 		bool plane;
 
 		DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
@@ -14846,33 +14853,12 @@  static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		to_intel_plane_state(crtc->base.primary->state)->visible = true;
 		crtc->base.primary->crtc = &crtc->base;
 		crtc->plane = !plane;
-		intel_crtc_control(&crtc->base, false);
+		intel_crtc_control(&crtc->base, false, true);
 		crtc->plane = plane;
-
-		/* ... and break all links. */
-		for_each_intel_connector(dev, connector) {
-			if (connector->encoder->base.crtc != &crtc->base)
-				continue;
-
-			connector->base.dpms = DRM_MODE_DPMS_OFF;
-			connector->base.encoder = NULL;
-		}
-		/* multiple connectors may have the same encoder:
-		 *  handle them and break crtc link separately */
-		for_each_intel_connector(dev, connector)
-			if (connector->encoder->base.crtc == &crtc->base) {
-				connector->encoder->base.crtc = NULL;
-				connector->encoder->connectors_active = false;
-			}
-
-		WARN_ON(crtc->active);
-		crtc->base.state->enable = false;
-		crtc->base.state->active = false;
-		crtc->base.enabled = false;
 	}
 
 	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
-	    crtc->pipe == PIPE_A && !crtc->active) {
+	    crtc->pipe == PIPE_A && (!pipe_config || !pipe_config->base.active)) {
 		/* BIOS forgot to enable pipe A, this mostly happens after
 		 * resume. Force-enable the pipe to fix this, the update_dpms
 		 * call below we restore the pipe to the right state, but leave
@@ -14881,36 +14867,13 @@  static void intel_sanitize_crtc(struct intel_crtc *crtc)
 	}
 
 	/* Adjust the state of the output pipe according to whether we
-	 * have active connectors/encoders. */
-	intel_crtc_update_dpms(&crtc->base);
-
-	if (crtc->active != crtc->base.state->active) {
-		struct intel_encoder *encoder;
+	 * have active connectors/encoders */
+	enable = false;
+	for_each_encoder_on_crtc(dev, &crtc->base, intel_encoder)
+		enable |= intel_encoder->connectors_active;
 
-		/* This can happen either due to bugs in the get_hw_state
-		 * functions or because the pipe is force-enabled due to the
-		 * pipe A quirk. */
-		DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
-			      crtc->base.base.id,
-			      crtc->base.state->enable ? "enabled" : "disabled",
-			      crtc->active ? "enabled" : "disabled");
-
-		crtc->base.state->enable = crtc->active;
-		crtc->base.state->active = crtc->active;
-		crtc->base.enabled = crtc->active;
-
-		/* Because we only establish the connector -> encoder ->
-		 * crtc links if something is active, this means the
-		 * crtc is now deactivated. Break the links. connector
-		 * -> encoder links are only establish when things are
-		 *  actually up, hence no need to break them. */
-		WARN_ON(crtc->active);
-
-		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
-			WARN_ON(encoder->connectors_active);
-			encoder->base.crtc = NULL;
-		}
-	}
+	if (!enable && crtc->base.state->active && !pipe_config)
+		intel_crtc_control(&crtc->base, false, true);
 
 	if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
 		/*
@@ -15278,7 +15241,8 @@  void intel_modeset_setup_hw_state(struct drm_device *dev,
 				      &crtc->state->adjusted_mode);
 		}
 
-		intel_sanitize_crtc(intel_crtc);
+		intel_sanitize_crtc(intel_crtc, !force_restore ? NULL :
+				    to_intel_crtc_state(crtc_state));
 
 		/*
 		 * sanitize_crtc may have forced an update of crtc->state,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 807e001e4cee..ec721e31eae8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -993,7 +993,7 @@  void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 int intel_display_suspend(struct drm_device *dev);
-int intel_crtc_control(struct drm_crtc *crtc, bool enable);
+int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force);
 void intel_crtc_update_dpms(struct drm_crtc *crtc);
 void intel_encoder_destroy(struct drm_encoder *encoder);
 int intel_connector_init(struct intel_connector *);

Comments

On Mon, Jun 01, 2015 at 03:27:06PM +0200, Maarten Lankhorst wrote:
> Apply force if needed.

It's not clear to me what this means; can you elaborate?  It seems that
'force' in the context of intel_crtc_control() means we're updating the
'enable' field as well, not just the 'active' field.

> During boot pipe_config->active will be false.
> On resume no separate modeset is needed when the state gets restored
> with the sw state anyway.

If I understand the git history correctly, there's also a special case
where intel_modeset_setup_hw_state() gets called on lid status change
because some BIOS silently change hardware state behind our back.  Are
we still covered in that case?


Matt

> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c  |  8 ++--
>  drivers/gpu/drm/i915/intel_display.c | 84 +++++++++++-------------------------
>  drivers/gpu/drm/i915/intel_drv.h     |  2 +-
>  3 files changed, 29 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 51fe0fbcd00c..db23916c1875 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3637,7 +3637,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  		bool active = pipe_config->base.active;
>  
>  		if (active) {
> -			intel_crtc_control(&crtc->base, false);
> +			intel_crtc_control(&crtc->base, false, false);
>  			pipe_config = to_intel_crtc_state(crtc->base.state);
>  		}
>  
> @@ -3647,7 +3647,7 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
>  
>  		if (active)
> -			intel_crtc_control(&crtc->base, true);
> +			intel_crtc_control(&crtc->base, true, false);
>  	}
>  	drm_modeset_unlock_all(dev);
>  }
> @@ -3671,7 +3671,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  		bool active = pipe_config->base.active;
>  
>  		if (active) {
> -			intel_crtc_control(&crtc->base, false);
> +			intel_crtc_control(&crtc->base, false, false);
>  			pipe_config = to_intel_crtc_state(crtc->base.state);
>  		}
>  
> @@ -3681,7 +3681,7 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
>  					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
>  
>  		if (active)
> -			intel_crtc_control(&crtc->base, true);
> +			intel_crtc_control(&crtc->base, true, false);
>  	}
>  	drm_modeset_unlock_all(dev);
>  }
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0f031658a297..8e9afc55c284 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6192,7 +6192,7 @@ free:
>  }
>  
>  /* Master function to enable/disable CRTC and corresponding power wells */
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable)
> +int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force)
>  {
>  	struct drm_device *dev = crtc->dev;
>  	struct drm_mode_config *config = &dev->mode_config;
> @@ -6202,10 +6202,13 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
>  	struct drm_atomic_state *state;
>  	int ret;
>  
> -	if (enable == intel_crtc->active)
> +	if (WARN_ON(active && force))
> +		return -EINVAL;
> +
> +	if (active == intel_crtc->active)
>  		return 0;
>  
> -	if (enable && !crtc->state->enable)
> +	if (active && !crtc->state->enable)
>  		return 0;
>  
>  	/* this function should be called with drm_modeset_lock_all for now */
> @@ -6225,7 +6228,9 @@ int intel_crtc_control(struct drm_crtc *crtc, bool enable)
>  		ret = PTR_ERR(pipe_config);
>  		goto err;
>  	}
> -	pipe_config->base.active = enable;
> +	pipe_config->base.active = active;
> +	if (force)
> +		pipe_config->base.enable = false;
>  
>  	ret = intel_set_mode(state);
>  	if (!ret)
> @@ -6249,7 +6254,7 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
>  	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
>  		enable |= intel_encoder->connectors_active;
>  
> -	intel_crtc_control(crtc, enable);
> +	intel_crtc_control(crtc, enable, false);
>  }
>  
>  void intel_encoder_destroy(struct drm_encoder *encoder)
> @@ -14812,11 +14817,14 @@ intel_check_plane_mapping(struct intel_crtc *crtc)
>  	return true;
>  }
>  
> -static void intel_sanitize_crtc(struct intel_crtc *crtc)
> +static void intel_sanitize_crtc(struct intel_crtc *crtc,
> +				struct intel_crtc_state *pipe_config)
>  {
>  	struct drm_device *dev = crtc->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct intel_encoder *intel_encoder;
>  	u32 reg;
> +	bool enable;
>  
>  	/* Clear any frame start delays used for debugging left by the BIOS */
>  	reg = PIPECONF(crtc->config->cpu_transcoder);
> @@ -14833,7 +14841,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  	 * disable the crtc (and hence change the state) if it is wrong. Note
>  	 * that gen4+ has a fixed plane -> pipe mapping.  */
>  	if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
> -		struct intel_connector *connector;
>  		bool plane;
>  
>  		DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
> @@ -14846,33 +14853,12 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  		to_intel_plane_state(crtc->base.primary->state)->visible = true;
>  		crtc->base.primary->crtc = &crtc->base;
>  		crtc->plane = !plane;
> -		intel_crtc_control(&crtc->base, false);
> +		intel_crtc_control(&crtc->base, false, true);
>  		crtc->plane = plane;
> -
> -		/* ... and break all links. */
> -		for_each_intel_connector(dev, connector) {
> -			if (connector->encoder->base.crtc != &crtc->base)
> -				continue;
> -
> -			connector->base.dpms = DRM_MODE_DPMS_OFF;
> -			connector->base.encoder = NULL;
> -		}
> -		/* multiple connectors may have the same encoder:
> -		 *  handle them and break crtc link separately */
> -		for_each_intel_connector(dev, connector)
> -			if (connector->encoder->base.crtc == &crtc->base) {
> -				connector->encoder->base.crtc = NULL;
> -				connector->encoder->connectors_active = false;
> -			}
> -
> -		WARN_ON(crtc->active);
> -		crtc->base.state->enable = false;
> -		crtc->base.state->active = false;
> -		crtc->base.enabled = false;
>  	}
>  
>  	if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
> -	    crtc->pipe == PIPE_A && !crtc->active) {
> +	    crtc->pipe == PIPE_A && (!pipe_config || !pipe_config->base.active)) {
>  		/* BIOS forgot to enable pipe A, this mostly happens after
>  		 * resume. Force-enable the pipe to fix this, the update_dpms
>  		 * call below we restore the pipe to the right state, but leave
> @@ -14881,36 +14867,13 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>  	}
>  
>  	/* Adjust the state of the output pipe according to whether we
> -	 * have active connectors/encoders. */
> -	intel_crtc_update_dpms(&crtc->base);
> -
> -	if (crtc->active != crtc->base.state->active) {
> -		struct intel_encoder *encoder;
> +	 * have active connectors/encoders */
> +	enable = false;
> +	for_each_encoder_on_crtc(dev, &crtc->base, intel_encoder)
> +		enable |= intel_encoder->connectors_active;
>  
> -		/* This can happen either due to bugs in the get_hw_state
> -		 * functions or because the pipe is force-enabled due to the
> -		 * pipe A quirk. */
> -		DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
> -			      crtc->base.base.id,
> -			      crtc->base.state->enable ? "enabled" : "disabled",
> -			      crtc->active ? "enabled" : "disabled");
> -
> -		crtc->base.state->enable = crtc->active;
> -		crtc->base.state->active = crtc->active;
> -		crtc->base.enabled = crtc->active;
> -
> -		/* Because we only establish the connector -> encoder ->
> -		 * crtc links if something is active, this means the
> -		 * crtc is now deactivated. Break the links. connector
> -		 * -> encoder links are only establish when things are
> -		 *  actually up, hence no need to break them. */
> -		WARN_ON(crtc->active);
> -
> -		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> -			WARN_ON(encoder->connectors_active);
> -			encoder->base.crtc = NULL;
> -		}
> -	}
> +	if (!enable && crtc->base.state->active && !pipe_config)
> +		intel_crtc_control(&crtc->base, false, true);
>  
>  	if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
>  		/*
> @@ -15278,7 +15241,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
>  				      &crtc->state->adjusted_mode);
>  		}
>  
> -		intel_sanitize_crtc(intel_crtc);
> +		intel_sanitize_crtc(intel_crtc, !force_restore ? NULL :
> +				    to_intel_crtc_state(crtc_state));
>  
>  		/*
>  		 * sanitize_crtc may have forced an update of crtc->state,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 807e001e4cee..ec721e31eae8 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -993,7 +993,7 @@ void intel_mark_busy(struct drm_device *dev);
>  void intel_mark_idle(struct drm_device *dev);
>  void intel_crtc_restore_mode(struct drm_crtc *crtc);
>  int intel_display_suspend(struct drm_device *dev);
> -int intel_crtc_control(struct drm_crtc *crtc, bool enable);
> +int intel_crtc_control(struct drm_crtc *crtc, bool active, bool force);
>  void intel_crtc_update_dpms(struct drm_crtc *crtc);
>  void intel_encoder_destroy(struct drm_encoder *encoder);
>  int intel_connector_init(struct intel_connector *);
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Op 03-06-15 om 03:27 schreef Matt Roper:
> On Mon, Jun 01, 2015 at 03:27:06PM +0200, Maarten Lankhorst wrote:
>> Apply force if needed.
> It's not clear to me what this means; can you elaborate?  It seems that
> 'force' in the context of intel_crtc_control() means we're updating the
> 'enable' field as well, not just the 'active' field.
>
>> During boot pipe_config->active will be false.
>> On resume no separate modeset is needed when the state gets restored
>> with the sw state anyway.
> If I understand the git history correctly, there's also a special case
> where intel_modeset_setup_hw_state() gets called on lid status change
> because some BIOS silently change hardware state behind our back.  Are
> we still covered in that case?
Sure why not? At the point we swapped our previous sw state to the atomic struct, which we don't touch here.

But looking some closer I think manually setting enable might not be enough, we should probably
call drm_atomic_set_mode_for_crtc and remove all connectors ourself, I think I may add some helper for that,
if it's useful for others too.

I was looking if crtc_state->enable == !num_connectors was enforced, that seems to be done
by drm_atomic_helper_check_modeset fortunately. So I think right now this patch would fail to do
what it says..

~Maarten