[v6,1/2] dt-bindings: display/bridge: Add binding for NWL mipi dsi host controller

Submitted by Guido Günther on Sept. 22, 2019, 4:47 p.m.

Details

Message ID 3bef8eb6a7dd32406e31c68f39ccde3accb58222.1569170717.git.agx@sigxcpu.org
State New
Headers show
Series "drm: bridge: Add NWL MIPI DSI host controller support" ( rev: 6 ) in DRI devel

Browsing this patch as part of:
"drm: bridge: Add NWL MIPI DSI host controller support" rev 6 in DRI devel
<< prev patch [1/2] next patch >>

Commit Message

Guido Günther Sept. 22, 2019, 4:47 p.m.
The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/bridge/nwl-dsi.yaml      | 176 ++++++++++++++++++
 1 file changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml

Patch hide | download patch | download mbox

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..31119c7885ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,176 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+  - Guido Gúnther <agx@sigxcpu.org>
+  - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+
+  mux-controls:
+    description:
+      mux controller node to use for operating the input mux
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: dsi byte reset line
+      - description: dsi dpi reset line
+      - description: dsi esc reset line
+      - description: dsi pclk reset line
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/graph.txt.
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node to receive pixel data from the
+          display controller
+
+      port@1:
+        type: object
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+patternProperties:
+  "^panel@[0-9]+$":
+    type: object
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - mux-controls
+  - phy-names
+  - phys
+  - ports
+  - reg
+  - reset-names
+  - resets
+
+additionalProperties: false
+
+examples:
+ - |
+
+   mipi_dsi: mipi_dsi@30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
+              interrupts = <0 34 4>;
+              mux-controls = <&mux 0>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel@0 {
+                      compatible = "rocktech,jh057n00900";
+                      reg = <0>;
+                      port@0 {
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                           reg = <0>;
+                           mipi_dsi_in: endpoint {
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port@1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+      };

Comments

On 22.09.2019 18:47, Guido Günther wrote:
> The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> Tested-by: Robert Chiras <robert.chiras@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/display/bridge/nwl-dsi.yaml      | 176 ++++++++++++++++++
>  1 file changed, 176 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> new file mode 100644
> index 000000000000..31119c7885ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> @@ -0,0 +1,176 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://protect2.fireeye.com/url?k=7c9397fbdbbe3fd5.7c921cb4-87fc4542b5f41502&u=http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Northwest Logic MIPI-DSI controller on i.MX SoCs
> +
> +maintainers:
> +  - Guido Gúnther <agx@sigxcpu.org>
> +  - Robert Chiras <robert.chiras@nxp.com>
> +
> +description: |
> +  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
> +  the SOCs NWL MIPI-DSI host controller.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mq-nwl-dsi
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: DSI core clock
> +      - description: RX_ESC clock (used in escape mode)
> +      - description: TX_ESC clock (used in escape mode)
> +      - description: PHY_REF clock
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: rx_esc
> +      - const: tx_esc
> +      - const: phy_ref
> +
> +  mux-controls:
> +    description:
> +      mux controller node to use for operating the input mux
> +
> +  phys:
> +    maxItems: 1
> +    description:
> +      A phandle to the phy module representing the DPHY
> +
> +  phy-names:
> +    items:
> +      - const: dphy
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: dsi byte reset line
> +      - description: dsi dpi reset line
> +      - description: dsi esc reset line
> +      - description: dsi pclk reset line
> +
> +  reset-names:
> +    items:
> +      - const: byte
> +      - const: dpi
> +      - const: esc
> +      - const: pclk
> +
> +  ports:
> +    type: object
> +    description:
> +      A node containing DSI input & output port nodes with endpoint
> +      definitions as documented in
> +      Documentation/devicetree/bindings/graph.txt.
> +    properties:
> +      port@0:
> +        type: object
> +        description:
> +          Input port node to receive pixel data from the
> +          display controller
> +
> +      port@1:
> +        type: object
> +        description:
> +          DSI output port node to the panel or the next bridge
> +          in the chain
> +
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +    required:
> +      - '#address-cells'
> +      - '#size-cells'
> +      - port@0
> +      - port@1
> +
> +    additionalProperties: false
> +
> +patternProperties:
> +  "^panel@[0-9]+$":
> +    type: object
> +
> +required:
> +  - '#address-cells'
> +  - '#size-cells'
> +  - clock-names
> +  - clocks
> +  - compatible
> +  - interrupts
> +  - mux-controls


As I understand mux is not a part of the device, so maybe would be safer
to make it optional.


Regards

Andrzej


> +  - phy-names
> +  - phys
> +  - ports
> +  - reg
> +  - reset-names
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> +   mipi_dsi: mipi_dsi@30a00000 {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +              compatible = "fsl,imx8mq-nwl-dsi";
> +              reg = <0x30A00000 0x300>;
> +              clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
> +              clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
> +              interrupts = <0 34 4>;
> +              mux-controls = <&mux 0>;
> +              power-domains = <&pgc_mipi>;
> +              resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
> +              reset-names = "byte", "dpi", "esc", "pclk";
> +              phys = <&dphy>;
> +              phy-names = "dphy";
> +
> +              panel@0 {
> +                      compatible = "rocktech,jh057n00900";
> +                      reg = <0>;
> +                      port@0 {
> +                           panel_in: endpoint {
> +                                     remote-endpoint = <&mipi_dsi_out>;
> +                           };
> +                      };
> +              };
> +
> +              ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                           reg = <0>;
> +                           mipi_dsi_in: endpoint {
> +                                        remote-endpoint = <&lcdif_mipi_dsi>;
> +                           };
> +                    };
> +                    port@1 {
> +                           reg = <1>;
> +                           mipi_dsi_out: endpoint {
> +                                         remote-endpoint = <&panel_in>;
> +                           };
> +                    };
> +              };
> +      };
Hi,
On Mon, Sep 23, 2019 at 10:59:34AM +0200, Andrzej Hajda wrote:
> On 22.09.2019 18:47, Guido Günther wrote:
> > The Northwest Logic MIPI DSI IP core can be found in NXPs i.MX8 SoCs.
> >
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > Tested-by: Robert Chiras <robert.chiras@nxp.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> >  .../bindings/display/bridge/nwl-dsi.yaml      | 176 ++++++++++++++++++
> >  1 file changed, 176 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> > new file mode 100644
> > index 000000000000..31119c7885ff
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
> > @@ -0,0 +1,176 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: https://protect2.fireeye.com/url?k=7c9397fbdbbe3fd5.7c921cb4-87fc4542b5f41502&u=http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Northwest Logic MIPI-DSI controller on i.MX SoCs
> > +
> > +maintainers:
> > +  - Guido Gúnther <agx@sigxcpu.org>
> > +  - Robert Chiras <robert.chiras@nxp.com>
> > +
> > +description: |
> > +  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
> > +  the SOCs NWL MIPI-DSI host controller.
> > +
> > +properties:
> > +  compatible:
> > +    const: fsl,imx8mq-nwl-dsi
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +  clocks:
> > +    items:
> > +      - description: DSI core clock
> > +      - description: RX_ESC clock (used in escape mode)
> > +      - description: TX_ESC clock (used in escape mode)
> > +      - description: PHY_REF clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: core
> > +      - const: rx_esc
> > +      - const: tx_esc
> > +      - const: phy_ref
> > +
> > +  mux-controls:
> > +    description:
> > +      mux controller node to use for operating the input mux
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description:
> > +      A phandle to the phy module representing the DPHY
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dphy
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: dsi byte reset line
> > +      - description: dsi dpi reset line
> > +      - description: dsi esc reset line
> > +      - description: dsi pclk reset line
> > +
> > +  reset-names:
> > +    items:
> > +      - const: byte
> > +      - const: dpi
> > +      - const: esc
> > +      - const: pclk
> > +
> > +  ports:
> > +    type: object
> > +    description:
> > +      A node containing DSI input & output port nodes with endpoint
> > +      definitions as documented in
> > +      Documentation/devicetree/bindings/graph.txt.
> > +    properties:
> > +      port@0:
> > +        type: object
> > +        description:
> > +          Input port node to receive pixel data from the
> > +          display controller
> > +
> > +      port@1:
> > +        type: object
> > +        description:
> > +          DSI output port node to the panel or the next bridge
> > +          in the chain
> > +
> > +      '#address-cells':
> > +        const: 1
> > +
> > +      '#size-cells':
> > +        const: 0
> > +
> > +    required:
> > +      - '#address-cells'
> > +      - '#size-cells'
> > +      - port@0
> > +      - port@1
> > +
> > +    additionalProperties: false
> > +
> > +patternProperties:
> > +  "^panel@[0-9]+$":
> > +    type: object
> > +
> > +required:
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +  - clock-names
> > +  - clocks
> > +  - compatible
> > +  - interrupts
> > +  - mux-controls
> 
> 
> As I understand mux is not a part of the device, so maybe would be safer
> to make it optional.

I had mux-sel required for imx8mq *only* but Rob suggested to make things
required in general until we add other SoCs:

    https://lore.kernel.org/linux-arm-kernel/CAL_JsqK-5=WMZgNuJDTJ3Dm3YOJNw_9QCrPOOSe7MQzMV26pHw@mail.gmail.com/

Cheers,
 -- Guido

> 
> 
> Regards
> 
> Andrzej
> 
> 
> > +  - phy-names
> > +  - phys
> > +  - ports
> > +  - reg
> > +  - reset-names
> > +  - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > +
> > +   mipi_dsi: mipi_dsi@30a00000 {
> > +              #address-cells = <1>;
> > +              #size-cells = <0>;
> > +              compatible = "fsl,imx8mq-nwl-dsi";
> > +              reg = <0x30A00000 0x300>;
> > +              clocks = <&clk 163>, <&clk 244>, <&clk 245>, <&clk 164>;
> > +              clock-names = "core", "rx_esc", "tx_esc", "phy_ref";
> > +              interrupts = <0 34 4>;
> > +              mux-controls = <&mux 0>;
> > +              power-domains = <&pgc_mipi>;
> > +              resets = <&src 0>, <&src 1>, <&src 2>, <&src 3>;
> > +              reset-names = "byte", "dpi", "esc", "pclk";
> > +              phys = <&dphy>;
> > +              phy-names = "dphy";
> > +
> > +              panel@0 {
> > +                      compatible = "rocktech,jh057n00900";
> > +                      reg = <0>;
> > +                      port@0 {
> > +                           panel_in: endpoint {
> > +                                     remote-endpoint = <&mipi_dsi_out>;
> > +                           };
> > +                      };
> > +              };
> > +
> > +              ports {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    port@0 {
> > +                           reg = <0>;
> > +                           mipi_dsi_in: endpoint {
> > +                                        remote-endpoint = <&lcdif_mipi_dsi>;
> > +                           };
> > +                    };
> > +                    port@1 {
> > +                           reg = <1>;
> > +                           mipi_dsi_out: endpoint {
> > +                                         remote-endpoint = <&panel_in>;
> > +                           };
> > +                    };
> > +              };
> > +      };
> 
>