drm: dw-hdmi-i2s: enable audio clock in audio_startup

Submitted by Cheng-yi Chiang on Aug. 29, 2019, 4:29 a.m.

Details

Message ID 20190829042957.150929-1-cychiang@chromium.org
State New
Headers show
Series "drm: dw-hdmi-i2s: enable audio clock in audio_startup" ( rev: 1 ) in DRI devel

Not browsing as part of any series.

Commit Message

Cheng-yi Chiang Aug. 29, 2019, 4:29 a.m.
In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.

On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 5cbb71a866d5..08b4adbb1ddc 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -69,6 +69,14 @@  static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	hdmi_write(audio, conf0, HDMI_AUD_CONF0);
 	hdmi_write(audio, conf1, HDMI_AUD_CONF1);
 
+	return 0;
+}
+
+static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
+{
+	struct dw_hdmi_i2s_audio_data *audio = data;
+	struct dw_hdmi *hdmi = audio->hdmi;
+
 	dw_hdmi_audio_enable(hdmi);
 
 	return 0;
@@ -105,6 +113,7 @@  static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
 }
 
 static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
+	.audio_startup = dw_hdmi_i2s_audio_startup,
 	.hw_params	= dw_hdmi_i2s_hw_params,
 	.audio_shutdown	= dw_hdmi_i2s_audio_shutdown,
 	.get_dai_id	= dw_hdmi_i2s_get_dai_id,

Comments

Hi,

On Wed, Aug 28, 2019 at 9:30 PM Cheng-Yi Chiang <cychiang@chromium.org> wrote:
>
> In the designware databook, the sequence of enabling audio clock and
> setting format is not clearly specified.
> Currently, audio clock is enabled in the end of hw_param ops after
> setting format.
>
> On some monitors, there is a possibility that audio does not come out.
> Fix this by enabling audio clock in audio_startup ops
> before hw_param ops setting format.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index 5cbb71a866d5..08b4adbb1ddc 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
>         hdmi_write(audio, conf0, HDMI_AUD_CONF0);
>         hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>
> +       return 0;
> +}
> +
> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> +{
> +       struct dw_hdmi_i2s_audio_data *audio = data;
> +       struct dw_hdmi *hdmi = audio->hdmi;
> +
>         dw_hdmi_audio_enable(hdmi);
>
>         return 0;
> @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>  }
>
>  static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> +       .audio_startup = dw_hdmi_i2s_audio_startup,
>         .hw_params      = dw_hdmi_i2s_hw_params,
>         .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
>         .get_dai_id     = dw_hdmi_i2s_get_dai_id,
> --

I am no expert on audio stuff, but this seems sane to me.  If you
happened to spin it for another reason, it might seem slightly nicer
to put the setting of ".audio_startup" adjacent to the setting of
".audio_shutdown" in the struct.

I have tested your patch on Chrome OS 4.19 and it definitely fixes the
problems I saw.  Chrome OS 4.19 is a little different than upstream
and I'm not setup to test HDMI audio directly on upstream, but I did
at least confirm that my problem _wasn't_ magically fixed by any of
these patches that I found upstream (I picked them into my tree and
still saw the problem):

fc1ca6e01d0a drm/bridge: dw-hdmi-i2s: add .get_eld support
43e88f670a5e drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes
46cecde310bb drm/bridge: dw-hdmi-i2s: reset audio fifo before applying
new params
0c6098859176 drm/bridge: dw-hdmi-i2s: set the channel allocation
17a1e555b608 drm/bridge: dw-hdmi-i2s: enable lpcm multi channels
da5f5bc92f49 drm/bridge: dw-hdmi: set channel count in the infoframes
2a2a3d2ff799 drm/bridge: dw-hdmi: move audio channel setup out of ahb
8067f62bccaf drm/bridge: dw-hdmi-i2s: support more i2s format

Thus:

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>

-Doug
On 2019-08-29 06:29, Cheng-Yi Chiang wrote:
> In the designware databook, the sequence of enabling audio clock and
> setting format is not clearly specified.
> Currently, audio clock is enabled in the end of hw_param ops after
> setting format.
>
> On some monitors, there is a possibility that audio does not come out.
> Fix this by enabling audio clock in audio_startup ops
> before hw_param ops setting format.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index 5cbb71a866d5..08b4adbb1ddc 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
>  	hdmi_write(audio, conf0, HDMI_AUD_CONF0);
>  	hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>  
> +	return 0;
> +}
> +
> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> +{
> +	struct dw_hdmi_i2s_audio_data *audio = data;
> +	struct dw_hdmi *hdmi = audio->hdmi;
> +
>  	dw_hdmi_audio_enable(hdmi);
>  
>  	return 0;
> @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>  }
>  
>  static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> +	.audio_startup = dw_hdmi_i2s_audio_startup,

A small white space nit, there should be a tab and not space to align the equal sign above.
Also this patch do not cleanly apply to drm-misc-next or linux-next after
fc1ca6e01d0a "drm/bridge: dw-hdmi-i2s: add .get_eld support" was merged.

This patch does fix an issue I have observed on my Rockchip devices where audio would not always
came out after switching between audio streams having different rate and channels parameters.
I used to carry [1] to fix that issue, but this seems like a more sane fix.

[1] https://github.com/Kwiboo/linux-rockchip/commit/4862e4044532b8b480fa3a0faddc197586623808

With above fixed,

Reviewed-by: Jonas Karlman <jonas@kwiboo.se>

Regards,
Jonas

>  	.hw_params	= dw_hdmi_i2s_hw_params,
>  	.audio_shutdown	= dw_hdmi_i2s_audio_shutdown,
>  	.get_dai_id	= dw_hdmi_i2s_get_dai_id,
On Sun, Sep 1, 2019 at 6:04 PM Jonas Karlman <jonas@kwiboo.se> wrote:
>
> On 2019-08-29 06:29, Cheng-Yi Chiang wrote:
> > In the designware databook, the sequence of enabling audio clock and
> > setting format is not clearly specified.
> > Currently, audio clock is enabled in the end of hw_param ops after
> > setting format.
> >
> > On some monitors, there is a possibility that audio does not come out.
> > Fix this by enabling audio clock in audio_startup ops
> > before hw_param ops setting format.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> > ---
> >  drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > index 5cbb71a866d5..08b4adbb1ddc 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> > @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
> >       hdmi_write(audio, conf0, HDMI_AUD_CONF0);
> >       hdmi_write(audio, conf1, HDMI_AUD_CONF1);
> >
> > +     return 0;
> > +}
> > +
> > +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> > +{
> > +     struct dw_hdmi_i2s_audio_data *audio = data;
> > +     struct dw_hdmi *hdmi = audio->hdmi;
> > +
> >       dw_hdmi_audio_enable(hdmi);
> >
> >       return 0;
> > @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> >  }
> >
> >  static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> > +     .audio_startup = dw_hdmi_i2s_audio_startup,
>
> A small white space nit, there should be a tab and not space to align the equal sign above.

ACK. Will fix in v2.
>
> Also this patch do not cleanly apply to drm-misc-next or linux-next after
> fc1ca6e01d0a "drm/bridge: dw-hdmi-i2s: add .get_eld support" was merged.

ACK. Will rebase in v2.
>
>
>
>
> This patch does fix an issue I have observed on my Rockchip devices where audio would not always
> came out after switching between audio streams having different rate and channels parameters.
> I used to carry [1] to fix that issue, but this seems like a more sane fix.
>
> [1] https://github.com/Kwiboo/linux-rockchip/commit/4862e4044532b8b480fa3a0faddc197586623808
>
> With above fixed,
>
> Reviewed-by: Jonas Karlman <jonas@kwiboo.se>


Thanks a lot!

>
>
> Regards,
> Jonas
>
> >       .hw_params      = dw_hdmi_i2s_hw_params,
> >       .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> >       .get_dai_id     = dw_hdmi_i2s_get_dai_id,
>