[v4,3/4] dt-bindings: backlight: Add led-backlight binding

Submitted by Jean-Jacques Hiblot on July 17, 2019, 2:15 p.m.

Details

Message ID 20190717141514.21171-4-jjhiblot@ti.com
State New
Headers show
Series "Add a generic driver for LED-based backlight" ( rev: 4 ) in DRI devel

Not browsing as part of any series.

Commit Message

Jean-Jacques Hiblot July 17, 2019, 2:15 p.m.
Add DT binding for led-backlight.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---
 .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt

Patch hide | download patch | download mbox

diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
new file mode 100644
index 000000000000..4c7dfbe7f67a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
@@ -0,0 +1,28 @@ 
+led-backlight bindings
+
+This binding is used to describe a basic backlight device made of LEDs.
+It can also be used to describe a backlight device controlled by the output of
+a LED driver.
+
+Required properties:
+  - compatible: "led-backlight"
+  - leds: a list of LEDs
+
+Optional properties:
+  - brightness-levels: Array of distinct brightness levels. The levels must be
+                       in the range accepted by the underlying LED devices.
+                       This is used to translate a backlight brightness level
+                       into a LED brightness level. If it is not provided, the
+                       identity mapping is used.
+
+  - default-brightness-level: The default brightness level.
+
+Example:
+
+	backlight {
+		compatible = "led-backlight";
+
+		leds = <&led1>, <&led2>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};

Comments

Cc devicetree@vger.kernel.org list - Rob once informed us this gets
higher priority in his queue this way.

On 7/17/19 4:15 PM, Jean-Jacques Hiblot wrote:
> Add DT binding for led-backlight.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> ---
>  .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..4c7dfbe7f67a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> @@ -0,0 +1,28 @@
> +led-backlight bindings
> +
> +This binding is used to describe a basic backlight device made of LEDs.
> +It can also be used to describe a backlight device controlled by the output of
> +a LED driver.
> +
> +Required properties:
> +  - compatible: "led-backlight"
> +  - leds: a list of LEDs
> +
> +Optional properties:
> +  - brightness-levels: Array of distinct brightness levels. The levels must be
> +                       in the range accepted by the underlying LED devices.
> +                       This is used to translate a backlight brightness level
> +                       into a LED brightness level. If it is not provided, the
> +                       identity mapping is used.
> +
> +  - default-brightness-level: The default brightness level.
> +
> +Example:
> +
> +	backlight {
> +		compatible = "led-backlight";
> +
> +		leds = <&led1>, <&led2>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +	};
>