[1/2] dt-bindings: display: panel: add AUO kd101n80-45na panel bindings

Submitted by Jitao Shi on June 8, 2019, 11:23 a.m.

Details

Message ID 20190608112342.64416-1-jitao.shi@mediatek.com
State New
Headers show
Series "Series without cover letter" ( rev: 1 ) in DRI devel

Not browsing as part of any series.

Commit Message

Jitao Shi June 8, 2019, 11:23 a.m.
Add documentation for auo kd101n80-45na panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../display/panel/auo,kd101n80-45na.txt       | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt

Patch hide | download patch | download mbox

diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
new file mode 100644
index 000000000000..7715cf703431
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
@@ -0,0 +1,34 @@ 
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,kd101n80-45na"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: 
+- avee-supply: 
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "auo,kd101n80-45na";
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		status = "okay";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};

Comments

Hi Jitao.

Binding doc for this panel looks good.

With added description for avdd + avee it is:

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

On Sat, Jun 08, 2019 at 07:23:41PM +0800, Jitao Shi wrote:
> Add documentation for auo kd101n80-45na panel.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
>  .../display/panel/auo,kd101n80-45na.txt       | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
> new file mode 100644
> index 000000000000..7715cf703431
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
> @@ -0,0 +1,34 @@
> +AUO Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "auo,kd101n80-45na"
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply: 
> +- avee-supply: 
Descriptions are missing for the 2 x supply.

> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> +	...
> +	panel@0 {
> +		compatible = "auo,kd101n80-45na";
> +		reg = <0>;
> +		enable-gpios = <&pio 45 0>;
> +		avdd-supply = <&ppvarn_lcd>;
> +		avee-supply = <&ppvarp_lcd>;
> +		pp1800-supply = <&pp1800_lcd>;
> +		backlight = <&backlight_lcd0>;
> +		status = "okay";
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&dsi_out>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.21.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel