[i-g-t,v5] test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP

Submitted by Manasi Navare on Dec. 5, 2018, 8:15 p.m.

Details

Message ID 20181205201523.4904-1-manasi.d.navare@intel.com
State New
Series "test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP"
Headers show

Commit Message

Manasi Navare Dec. 5, 2018, 8:15 p.m.
This patch adds a basic kms test to validate the display stream
compression functionality if supported on DP/eDP connector.
Currently this has only two subtests to force the DSC on all
the eDP and DP connectors that support it with default parameters.
This will be expanded to add more subtests to tweak DSC parameters.

v5:
* Fix test cleanup to avoid crash (Petri)
v4:
* Future proof for more test types (Petri)
* Fix alphabetical order (Petri)
* s/igt_display_init/igt_display_require (Petri)
* Remove blank lines after return (Petri)
v3:
* Use array of connectors and loop through (Petri)
* Also check for FEC on DP connectors (Manasi)
* Add a Pipe_A restriction on DP (Ville)
v2:
* Use IGT wrappers for all (DK, Antonio)
* Split into two subtests for eDP and DP types (Petri)

Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 tests/Makefile.sources |   1 +
 tests/kms_dp_dsc.c     | 258 +++++++++++++++++++++++++++++++++++++++++
 tests/meson.build      |   1 +
 3 files changed, 260 insertions(+)
 create mode 100644 tests/kms_dp_dsc.c

Patch hide | download patch | download mbox

diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index eedde1e8..a3c24c99 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -54,6 +54,7 @@  TESTS_progs = \
 	kms_crtc_background_color \
 	kms_cursor_crc \
 	kms_cursor_legacy \
+	kms_dp_dsc \
 	kms_draw_crc \
 	kms_fbcon_fbt \
 	kms_fence_pin_leak \
diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
new file mode 100644
index 00000000..e0faec1f
--- /dev/null
+++ b/tests/kms_dp_dsc.c
@@ -0,0 +1,258 @@ 
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Displayport Display Stream Compression test
+ * Until the CRC support is added this needs to be invoked with --interactive
+ * to manually verify if the test pattern is seen without corruption for each
+ * subtest.
+ *
+ * Authors:
+ * Manasi Navare <manasi.d.navare@intel.com>
+ *
+ */
+#include "igt.h"
+#include "igt_sysfs.h"
+#include <errno.h>
+#include <getopt.h>
+#include <math.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <strings.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <time.h>
+#include <fcntl.h>
+#include <termios.h>
+
+enum dsc_test_type
+{
+	test_basic_dsc_enable
+};
+
+typedef struct {
+	int drm_fd;
+	int debugfs_fd;
+	uint32_t id;
+	igt_display_t display;
+	struct igt_fb fb_test_pattern;
+	igt_output_t *output;
+	int mode_valid;
+	drmModeModeInfo *mode;
+	drmModeConnector *connector;
+	drmModeEncoder *encoder;
+	int crtc;
+	enum pipe pipe;
+	char conn_name[128];
+} data_t;
+
+static inline void manual(const char *expected)
+{
+	igt_debug_manual_check("all", expected);
+}
+
+static bool is_dp_dsc_supported(data_t *data)
+{
+	char file_name[128] = {0};
+	char buf[512];
+
+	strcpy(file_name, data->conn_name);
+	strcat(file_name, "/i915_dsc_fec_support");
+	igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
+					    sizeof(buf)) > 0);
+	igt_debugfs_read(data->drm_fd, file_name, buf);
+
+	return strstr(buf, "DSC_Sink_Support: yes");
+}
+
+static bool is_dp_fec_supported(data_t *data)
+{
+	char file_name[128] = {0};
+	char buf[512];
+
+	strcpy(file_name, data->conn_name);
+	strcat(file_name, "/i915_dsc_fec_support");
+	igt_debugfs_read(data->drm_fd, file_name, buf);
+
+	return strstr(buf, "FEC_Sink_Support: yes");
+}
+
+static bool is_dp_dsc_enabled(data_t *data)
+{
+	char file_name[128] = {0};
+	char buf[512];
+
+	strcpy(file_name, data->conn_name);
+	strcat(file_name, "/i915_dsc_fec_support");
+	igt_debugfs_read(data->drm_fd, file_name, buf);
+
+	return strstr(buf, "DSC_Enabled: yes");
+}
+
+static void force_dp_dsc_enable(data_t *data)
+{
+	char file_name[128] = {0};
+	int ret;
+
+	strcpy(file_name, data->conn_name);
+	strcat(file_name, "/i915_dsc_fec_support");
+	igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
+	ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
+	igt_assert_f(ret > 0, "debugfs_write failed");
+}
+
+static void clear_dp_dsc_enable(data_t *data)
+{
+	char file_name[128] = {0};
+	int ret;
+
+	strcpy(file_name, data->conn_name);
+	strcat(file_name, "/i915_dsc_fec_support");
+	igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
+	ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
+	igt_assert_f(ret > 0, "debugfs_write failed");
+}
+
+static void test_cleanup(data_t *data) {
+	igt_plane_t *primary;
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit(&data->display);
+
+	igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
+}
+
+
+/*
+ * Re-probe connectors and do a modeset with DSC
+ *
+ */
+static void update_display(data_t *data, enum dsc_test_type test_type)
+{
+	igt_plane_t *primary;
+	data->mode = igt_output_get_mode(data->output);
+	data->connector = data->output->config.connector;
+
+	if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
+	    data->pipe == PIPE_A) {
+		igt_debug ("DSC not supported on Pipe A on external DP\n");
+		return;
+	}
+
+	if (test_type == test_basic_dsc_enable) {
+		igt_debug ("DSC is supported on %s\n",
+			   data->conn_name);
+		force_dp_dsc_enable(data);
+		igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
+				      data->mode->vdisplay,
+				      DRM_FORMAT_XRGB8888,
+				      LOCAL_DRM_FORMAT_MOD_NONE,
+				      &data->fb_test_pattern);
+		primary = igt_output_get_plane_type(data->output,
+						    DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, &data->fb_test_pattern);
+		igt_display_commit(&data->display);
+		/* Until we have CRC check support, manually check if RGB test pattern has no corruption */
+		manual ("RGB test pattern without corruption");
+		igt_assert_f(is_dp_dsc_enabled(data),
+			     "Default DSC enable failed on Connector: %s Pipe: %s",
+			     data->conn_name,
+			     kmstest_pipe_name(data->pipe));
+		clear_dp_dsc_enable(data);
+	} else {
+		igt_assert(!"Unknown test type\n");
+	}
+}
+
+static void run_test(data_t *data, igt_output_t *output,
+		     enum dsc_test_type test_type)
+{
+	enum pipe pipe;
+
+	for_each_pipe_with_valid_output(&data->display, pipe, output) {
+		igt_output_set_pipe(output, pipe);
+		data->pipe = pipe;
+		data->output = output;
+		update_display(data, test_type);
+	}
+}
+
+igt_main
+{
+	data_t data = {};
+	igt_output_t *output;
+	drmModeRes *res;
+	drmModeConnector *connector;
+	int i, test_conn_cnt, test_cnt;
+	int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
+
+	igt_fixture {
+		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+		data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
+		kmstest_set_vt_graphics_mode();
+		igt_display_require(&data.display, data.drm_fd);
+		igt_require(res = drmModeGetResources(data.drm_fd));
+	}
+
+	for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
+
+		igt_subtest_f("basic-dsc-enable-%s",
+			      kmstest_connector_type_str(tests[test_cnt])) {
+			test_conn_cnt = 0;
+			for (i = 0; i < res->count_connectors; i++) {
+				connector = drmModeGetConnectorCurrent(data.drm_fd,
+								       res->connectors[i]);
+				if (connector->connection != DRM_MODE_CONNECTED ||
+				    connector->connector_type !=
+				    tests[test_cnt])
+					continue;
+				test_conn_cnt++;
+				output = igt_output_from_connector(&data.display, connector);
+				sprintf(data.conn_name, "%s-%d",
+					kmstest_connector_type_str(connector->connector_type),
+					test_conn_cnt);
+				igt_require_f(is_dp_dsc_supported(&data),
+					      "DSC not supported on connector %s \n",
+					      data.conn_name);
+				if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
+					igt_require_f(is_dp_fec_supported(&data),
+						      "DSC cannot be enabled without FEC on %s\n",
+						      data.conn_name);
+				run_test(&data, output, test_basic_dsc_enable);
+			}
+			if (data.output)
+				test_cleanup(&data);
+			igt_skip_on(test_conn_cnt == 0);
+		}
+	}
+
+	igt_fixture {
+		drmModeFreeConnector(connector);
+		drmModeFreeResources(res);
+		close(data.debugfs_fd);
+		close(data.drm_fd);
+		igt_display_fini(&data.display);
+	}
+	igt_exit();
+}
diff --git a/tests/meson.build b/tests/meson.build
index b8a6e61b..e14ab2b4 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -25,6 +25,7 @@  test_progs = [
 	'kms_crtc_background_color',
 	'kms_cursor_crc',
 	'kms_cursor_legacy',
+	'kms_dp_dsc',
 	'kms_draw_crc',
 	'kms_fbcon_fbt',
 	'kms_fence_pin_leak',

Comments

Manasi Navare Dec. 6, 2018, 3:43 p.m.
Hi Petri,

This version of the patch had clean CI results.
Is this good to get merged?
Thanks for all the review feedback.

Regards
Manasi

On Wed, Dec 05, 2018 at 12:15:23PM -0800, Manasi Navare wrote:
> This patch adds a basic kms test to validate the display stream
> compression functionality if supported on DP/eDP connector.
> Currently this has only two subtests to force the DSC on all
> the eDP and DP connectors that support it with default parameters.
> This will be expanded to add more subtests to tweak DSC parameters.
> 
> v5:
> * Fix test cleanup to avoid crash (Petri)
> v4:
> * Future proof for more test types (Petri)
> * Fix alphabetical order (Petri)
> * s/igt_display_init/igt_display_require (Petri)
> * Remove blank lines after return (Petri)
> v3:
> * Use array of connectors and loop through (Petri)
> * Also check for FEC on DP connectors (Manasi)
> * Add a Pipe_A restriction on DP (Ville)
> v2:
> * Use IGT wrappers for all (DK, Antonio)
> * Split into two subtests for eDP and DP types (Petri)
> 
> Cc: Petri Latvala <petri.latvala@intel.com>
> Cc: Antonio Argenziano <antonio.argenziano@intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  tests/Makefile.sources |   1 +
>  tests/kms_dp_dsc.c     | 258 +++++++++++++++++++++++++++++++++++++++++
>  tests/meson.build      |   1 +
>  3 files changed, 260 insertions(+)
>  create mode 100644 tests/kms_dp_dsc.c
> 
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index eedde1e8..a3c24c99 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -54,6 +54,7 @@ TESTS_progs = \
>  	kms_crtc_background_color \
>  	kms_cursor_crc \
>  	kms_cursor_legacy \
> +	kms_dp_dsc \
>  	kms_draw_crc \
>  	kms_fbcon_fbt \
>  	kms_fence_pin_leak \
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> new file mode 100644
> index 00000000..e0faec1f
> --- /dev/null
> +++ b/tests/kms_dp_dsc.c
> @@ -0,0 +1,258 @@
> +/*
> + * Copyright © 2018 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Displayport Display Stream Compression test
> + * Until the CRC support is added this needs to be invoked with --interactive
> + * to manually verify if the test pattern is seen without corruption for each
> + * subtest.
> + *
> + * Authors:
> + * Manasi Navare <manasi.d.navare@intel.com>
> + *
> + */
> +#include "igt.h"
> +#include "igt_sysfs.h"
> +#include <errno.h>
> +#include <getopt.h>
> +#include <math.h>
> +#include <stdint.h>
> +#include <stdbool.h>
> +#include <strings.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <signal.h>
> +#include <time.h>
> +#include <fcntl.h>
> +#include <termios.h>
> +
> +enum dsc_test_type
> +{
> +	test_basic_dsc_enable
> +};
> +
> +typedef struct {
> +	int drm_fd;
> +	int debugfs_fd;
> +	uint32_t id;
> +	igt_display_t display;
> +	struct igt_fb fb_test_pattern;
> +	igt_output_t *output;
> +	int mode_valid;
> +	drmModeModeInfo *mode;
> +	drmModeConnector *connector;
> +	drmModeEncoder *encoder;
> +	int crtc;
> +	enum pipe pipe;
> +	char conn_name[128];
> +} data_t;
> +
> +static inline void manual(const char *expected)
> +{
> +	igt_debug_manual_check("all", expected);
> +}
> +
> +static bool is_dp_dsc_supported(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
> +					    sizeof(buf)) > 0);
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "DSC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_fec_supported(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "FEC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_dsc_enabled(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "DSC_Enabled: yes");
> +}
> +
> +static void force_dp_dsc_enable(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	int ret;
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
> +	igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void clear_dp_dsc_enable(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	int ret;
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> +	igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void test_cleanup(data_t *data) {
> +	igt_plane_t *primary;
> +
> +	primary = igt_output_get_plane_type(data->output,
> +					    DRM_PLANE_TYPE_PRIMARY);
> +	igt_plane_set_fb(primary, NULL);
> +	igt_display_commit(&data->display);
> +
> +	igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> +}
> +
> +
> +/*
> + * Re-probe connectors and do a modeset with DSC
> + *
> + */
> +static void update_display(data_t *data, enum dsc_test_type test_type)
> +{
> +	igt_plane_t *primary;
> +	data->mode = igt_output_get_mode(data->output);
> +	data->connector = data->output->config.connector;
> +
> +	if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> +	    data->pipe == PIPE_A) {
> +		igt_debug ("DSC not supported on Pipe A on external DP\n");
> +		return;
> +	}
> +
> +	if (test_type == test_basic_dsc_enable) {
> +		igt_debug ("DSC is supported on %s\n",
> +			   data->conn_name);
> +		force_dp_dsc_enable(data);
> +		igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> +				      data->mode->vdisplay,
> +				      DRM_FORMAT_XRGB8888,
> +				      LOCAL_DRM_FORMAT_MOD_NONE,
> +				      &data->fb_test_pattern);
> +		primary = igt_output_get_plane_type(data->output,
> +						    DRM_PLANE_TYPE_PRIMARY);
> +		igt_plane_set_fb(primary, &data->fb_test_pattern);
> +		igt_display_commit(&data->display);
> +		/* Until we have CRC check support, manually check if RGB test pattern has no corruption */
> +		manual ("RGB test pattern without corruption");
> +		igt_assert_f(is_dp_dsc_enabled(data),
> +			     "Default DSC enable failed on Connector: %s Pipe: %s",
> +			     data->conn_name,
> +			     kmstest_pipe_name(data->pipe));
> +		clear_dp_dsc_enable(data);
> +	} else {
> +		igt_assert(!"Unknown test type\n");
> +	}
> +}
> +
> +static void run_test(data_t *data, igt_output_t *output,
> +		     enum dsc_test_type test_type)
> +{
> +	enum pipe pipe;
> +
> +	for_each_pipe_with_valid_output(&data->display, pipe, output) {
> +		igt_output_set_pipe(output, pipe);
> +		data->pipe = pipe;
> +		data->output = output;
> +		update_display(data, test_type);
> +	}
> +}
> +
> +igt_main
> +{
> +	data_t data = {};
> +	igt_output_t *output;
> +	drmModeRes *res;
> +	drmModeConnector *connector;
> +	int i, test_conn_cnt, test_cnt;
> +	int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
> +
> +	igt_fixture {
> +		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> +		data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> +		kmstest_set_vt_graphics_mode();
> +		igt_display_require(&data.display, data.drm_fd);
> +		igt_require(res = drmModeGetResources(data.drm_fd));
> +	}
> +
> +	for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
> +
> +		igt_subtest_f("basic-dsc-enable-%s",
> +			      kmstest_connector_type_str(tests[test_cnt])) {
> +			test_conn_cnt = 0;
> +			for (i = 0; i < res->count_connectors; i++) {
> +				connector = drmModeGetConnectorCurrent(data.drm_fd,
> +								       res->connectors[i]);
> +				if (connector->connection != DRM_MODE_CONNECTED ||
> +				    connector->connector_type !=
> +				    tests[test_cnt])
> +					continue;
> +				test_conn_cnt++;
> +				output = igt_output_from_connector(&data.display, connector);
> +				sprintf(data.conn_name, "%s-%d",
> +					kmstest_connector_type_str(connector->connector_type),
> +					test_conn_cnt);
> +				igt_require_f(is_dp_dsc_supported(&data),
> +					      "DSC not supported on connector %s \n",
> +					      data.conn_name);
> +				if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
> +					igt_require_f(is_dp_fec_supported(&data),
> +						      "DSC cannot be enabled without FEC on %s\n",
> +						      data.conn_name);
> +				run_test(&data, output, test_basic_dsc_enable);
> +			}
> +			if (data.output)
> +				test_cleanup(&data);
> +			igt_skip_on(test_conn_cnt == 0);
> +		}
> +	}
> +
> +	igt_fixture {
> +		drmModeFreeConnector(connector);
> +		drmModeFreeResources(res);
> +		close(data.debugfs_fd);
> +		close(data.drm_fd);
> +		igt_display_fini(&data.display);
> +	}
> +	igt_exit();
> +}
> diff --git a/tests/meson.build b/tests/meson.build
> index b8a6e61b..e14ab2b4 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -25,6 +25,7 @@ test_progs = [
>  	'kms_crtc_background_color',
>  	'kms_cursor_crc',
>  	'kms_cursor_legacy',
> +	'kms_dp_dsc',
>  	'kms_draw_crc',
>  	'kms_fbcon_fbt',
>  	'kms_fence_pin_leak',
> -- 
> 2.19.1
>
Petri Latvala Dec. 7, 2018, 10:33 a.m.
On Wed, Dec 05, 2018 at 12:15:23PM -0800, Manasi Navare wrote:
> This patch adds a basic kms test to validate the display stream
> compression functionality if supported on DP/eDP connector.
> Currently this has only two subtests to force the DSC on all
> the eDP and DP connectors that support it with default parameters.
> This will be expanded to add more subtests to tweak DSC parameters.
> 
> v5:
> * Fix test cleanup to avoid crash (Petri)
> v4:
> * Future proof for more test types (Petri)
> * Fix alphabetical order (Petri)
> * s/igt_display_init/igt_display_require (Petri)
> * Remove blank lines after return (Petri)
> v3:
> * Use array of connectors and loop through (Petri)
> * Also check for FEC on DP connectors (Manasi)
> * Add a Pipe_A restriction on DP (Ville)
> v2:
> * Use IGT wrappers for all (DK, Antonio)
> * Split into two subtests for eDP and DP types (Petri)
> 
> Cc: Petri Latvala <petri.latvala@intel.com>
> Cc: Antonio Argenziano <antonio.argenziano@intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  tests/Makefile.sources |   1 +
>  tests/kms_dp_dsc.c     | 258 +++++++++++++++++++++++++++++++++++++++++
>  tests/meson.build      |   1 +
>  3 files changed, 260 insertions(+)
>  create mode 100644 tests/kms_dp_dsc.c
> 
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index eedde1e8..a3c24c99 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -54,6 +54,7 @@ TESTS_progs = \
>  	kms_crtc_background_color \
>  	kms_cursor_crc \
>  	kms_cursor_legacy \
> +	kms_dp_dsc \
>  	kms_draw_crc \
>  	kms_fbcon_fbt \
>  	kms_fence_pin_leak \
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> new file mode 100644
> index 00000000..e0faec1f
> --- /dev/null
> +++ b/tests/kms_dp_dsc.c
> @@ -0,0 +1,258 @@
> +/*
> + * Copyright © 2018 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Displayport Display Stream Compression test
> + * Until the CRC support is added this needs to be invoked with --interactive
> + * to manually verify if the test pattern is seen without corruption for each
> + * subtest.
> + *
> + * Authors:
> + * Manasi Navare <manasi.d.navare@intel.com>
> + *
> + */
> +#include "igt.h"
> +#include "igt_sysfs.h"
> +#include <errno.h>
> +#include <getopt.h>
> +#include <math.h>
> +#include <stdint.h>
> +#include <stdbool.h>
> +#include <strings.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <signal.h>
> +#include <time.h>
> +#include <fcntl.h>
> +#include <termios.h>
> +
> +enum dsc_test_type
> +{
> +	test_basic_dsc_enable
> +};
> +
> +typedef struct {
> +	int drm_fd;
> +	int debugfs_fd;
> +	uint32_t id;
> +	igt_display_t display;
> +	struct igt_fb fb_test_pattern;
> +	igt_output_t *output;
> +	int mode_valid;
> +	drmModeModeInfo *mode;
> +	drmModeConnector *connector;
> +	drmModeEncoder *encoder;
> +	int crtc;
> +	enum pipe pipe;
> +	char conn_name[128];
> +} data_t;
> +
> +static inline void manual(const char *expected)
> +{
> +	igt_debug_manual_check("all", expected);
> +}
> +
> +static bool is_dp_dsc_supported(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
> +					    sizeof(buf)) > 0);
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "DSC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_fec_supported(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "FEC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_dsc_enabled(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	char buf[512];
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> +	return strstr(buf, "DSC_Enabled: yes");
> +}
> +
> +static void force_dp_dsc_enable(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	int ret;
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
> +	igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void clear_dp_dsc_enable(data_t *data)
> +{
> +	char file_name[128] = {0};
> +	int ret;
> +
> +	strcpy(file_name, data->conn_name);
> +	strcat(file_name, "/i915_dsc_fec_support");
> +	igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> +	igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void test_cleanup(data_t *data) {
> +	igt_plane_t *primary;
> +
> +	primary = igt_output_get_plane_type(data->output,
> +					    DRM_PLANE_TYPE_PRIMARY);
> +	igt_plane_set_fb(primary, NULL);
> +	igt_display_commit(&data->display);
> +
> +	igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> +}
> +
> +
> +/*
> + * Re-probe connectors and do a modeset with DSC
> + *
> + */
> +static void update_display(data_t *data, enum dsc_test_type test_type)
> +{
> +	igt_plane_t *primary;
> +	data->mode = igt_output_get_mode(data->output);
> +	data->connector = data->output->config.connector;
> +
> +	if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> +	    data->pipe == PIPE_A) {
> +		igt_debug ("DSC not supported on Pipe A on external DP\n");
> +		return;
> +	}
> +
> +	if (test_type == test_basic_dsc_enable) {
> +		igt_debug ("DSC is supported on %s\n",
> +			   data->conn_name);
> +		force_dp_dsc_enable(data);
> +		igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> +				      data->mode->vdisplay,
> +				      DRM_FORMAT_XRGB8888,
> +				      LOCAL_DRM_FORMAT_MOD_NONE,
> +				      &data->fb_test_pattern);

This function is called from a loop and data->fb_test_pattern can
contain an fb already, no? Does this leak?
Anusha Dec. 12, 2018, 6:44 p.m.
>-----Original Message-----
>From: Latvala, Petri
>Sent: Friday, December 7, 2018 2:33 AM
>To: Navare, Manasi D <manasi.d.navare@intel.com>
>Cc: igt-dev@lists.freedesktop.org; Argenziano, Antonio
><antonio.argenziano@intel.com>; Pandiyan, Dhinakaran
><dhinakaran.pandiyan@intel.com>; Ville Syrjälä <ville.syrjala@linux.intel.com>;
>Srivatsa, Anusha <anusha.srivatsa@intel.com>
>Subject: Re: [PATCH i-g-t v5] test/kms_dp_dsc: Basic KMS test to validate VESA
>DSC on DP/eDP
>
>On Wed, Dec 05, 2018 at 12:15:23PM -0800, Manasi Navare wrote:
>> This patch adds a basic kms test to validate the display stream
>> compression functionality if supported on DP/eDP connector.
>> Currently this has only two subtests to force the DSC on all the eDP
>> and DP connectors that support it with default parameters.
>> This will be expanded to add more subtests to tweak DSC parameters.
>>
>> v5:
>> * Fix test cleanup to avoid crash (Petri)
>> v4:
>> * Future proof for more test types (Petri)
>> * Fix alphabetical order (Petri)
>> * s/igt_display_init/igt_display_require (Petri)
>> * Remove blank lines after return (Petri)
>> v3:
>> * Use array of connectors and loop through (Petri)
>> * Also check for FEC on DP connectors (Manasi)
>> * Add a Pipe_A restriction on DP (Ville)
>> v2:
>> * Use IGT wrappers for all (DK, Antonio)
>> * Split into two subtests for eDP and DP types (Petri)
>>
>> Cc: Petri Latvala <petri.latvala@intel.com>
>> Cc: Antonio Argenziano <antonio.argenziano@intel.com>
>> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
>> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
>> ---
>>  tests/Makefile.sources |   1 +
>>  tests/kms_dp_dsc.c     | 258 +++++++++++++++++++++++++++++++++++++++++
>>  tests/meson.build      |   1 +
>>  3 files changed, 260 insertions(+)
>>  create mode 100644 tests/kms_dp_dsc.c
>>
>> diff --git a/tests/Makefile.sources b/tests/Makefile.sources index
>> eedde1e8..a3c24c99 100644
>> --- a/tests/Makefile.sources
>> +++ b/tests/Makefile.sources
>> @@ -54,6 +54,7 @@ TESTS_progs = \
>>  	kms_crtc_background_color \
>>  	kms_cursor_crc \
>>  	kms_cursor_legacy \
>> +	kms_dp_dsc \
>>  	kms_draw_crc \
>>  	kms_fbcon_fbt \
>>  	kms_fence_pin_leak \
>> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c new file mode
>> 100644 index 00000000..e0faec1f
>> --- /dev/null
>> +++ b/tests/kms_dp_dsc.c
>> @@ -0,0 +1,258 @@
>> +/*
>> + * Copyright © 2018 Intel Corporation
>> + *
>> + * Permission is hereby granted, free of charge, to any person
>> +obtaining a
>> + * copy of this software and associated documentation files (the
>> +"Software"),
>> + * to deal in the Software without restriction, including without
>> +limitation
>> + * the rights to use, copy, modify, merge, publish, distribute,
>> +sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom
>> +the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including
>> +the next
>> + * paragraph) shall be included in all copies or substantial portions
>> +of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> +EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> +MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO
>EVENT
>> +SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
>DAMAGES
>> +OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> +ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> +OTHER DEALINGS
>> + * IN THE SOFTWARE.
>> + *
>> + * Displayport Display Stream Compression test
>> + * Until the CRC support is added this needs to be invoked with
>> +--interactive
>> + * to manually verify if the test pattern is seen without corruption
>> +for each
>> + * subtest.
>> + *
>> + * Authors:
>> + * Manasi Navare <manasi.d.navare@intel.com>
>> + *
>> + */
>> +#include "igt.h"
>> +#include "igt_sysfs.h"
>> +#include <errno.h>
>> +#include <getopt.h>
>> +#include <math.h>
>> +#include <stdint.h>
>> +#include <stdbool.h>
>> +#include <strings.h>
>> +#include <unistd.h>
>> +#include <stdlib.h>
>> +#include <signal.h>
>> +#include <time.h>
>> +#include <fcntl.h>
>> +#include <termios.h>
>> +
>> +enum dsc_test_type
>> +{
>> +	test_basic_dsc_enable
>> +};
>> +
>> +typedef struct {
>> +	int drm_fd;
>> +	int debugfs_fd;
>> +	uint32_t id;
>> +	igt_display_t display;
>> +	struct igt_fb fb_test_pattern;
>> +	igt_output_t *output;
>> +	int mode_valid;
>> +	drmModeModeInfo *mode;
>> +	drmModeConnector *connector;
>> +	drmModeEncoder *encoder;
>> +	int crtc;
>> +	enum pipe pipe;
>> +	char conn_name[128];
>> +} data_t;
>> +
>> +static inline void manual(const char *expected) {
>> +	igt_debug_manual_check("all", expected); }
>> +
>> +static bool is_dp_dsc_supported(data_t *data) {
>> +	char file_name[128] = {0};
>> +	char buf[512];
>> +
>> +	strcpy(file_name, data->conn_name);
>> +	strcat(file_name, "/i915_dsc_fec_support");
>> +	igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
>> +					    sizeof(buf)) > 0);
>> +	igt_debugfs_read(data->drm_fd, file_name, buf);
>> +
>> +	return strstr(buf, "DSC_Sink_Support: yes"); }
>> +
>> +static bool is_dp_fec_supported(data_t *data) {
>> +	char file_name[128] = {0};
>> +	char buf[512];
>> +
>> +	strcpy(file_name, data->conn_name);
>> +	strcat(file_name, "/i915_dsc_fec_support");
>> +	igt_debugfs_read(data->drm_fd, file_name, buf);
>> +
>> +	return strstr(buf, "FEC_Sink_Support: yes"); }
>> +
>> +static bool is_dp_dsc_enabled(data_t *data) {
>> +	char file_name[128] = {0};
>> +	char buf[512];
>> +
>> +	strcpy(file_name, data->conn_name);
>> +	strcat(file_name, "/i915_dsc_fec_support");
>> +	igt_debugfs_read(data->drm_fd, file_name, buf);
>> +
>> +	return strstr(buf, "DSC_Enabled: yes"); }
>> +
>> +static void force_dp_dsc_enable(data_t *data) {
>> +	char file_name[128] = {0};
>> +	int ret;
>> +
>> +	strcpy(file_name, data->conn_name);
>> +	strcat(file_name, "/i915_dsc_fec_support");
>> +	igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
>> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
>> +	igt_assert_f(ret > 0, "debugfs_write failed"); }
>> +
>> +static void clear_dp_dsc_enable(data_t *data) {
>> +	char file_name[128] = {0};
>> +	int ret;
>> +
>> +	strcpy(file_name, data->conn_name);
>> +	strcat(file_name, "/i915_dsc_fec_support");
>> +	igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
>> +	ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
>> +	igt_assert_f(ret > 0, "debugfs_write failed"); }
>> +
>> +static void test_cleanup(data_t *data) {
>> +	igt_plane_t *primary;
>> +
>> +	primary = igt_output_get_plane_type(data->output,
>> +					    DRM_PLANE_TYPE_PRIMARY);
>> +	igt_plane_set_fb(primary, NULL);
>> +	igt_display_commit(&data->display);
>> +
>> +	igt_remove_fb(data->drm_fd, &data->fb_test_pattern); }
>> +
>> +
>> +/*
>> + * Re-probe connectors and do a modeset with DSC
>> + *
>> + */
>> +static void update_display(data_t *data, enum dsc_test_type
>> +test_type) {
>> +	igt_plane_t *primary;
>> +	data->mode = igt_output_get_mode(data->output);
>> +	data->connector = data->output->config.connector;
>> +
>> +	if (data->connector->connector_type ==
>DRM_MODE_CONNECTOR_DisplayPort &&
>> +	    data->pipe == PIPE_A) {
>> +		igt_debug ("DSC not supported on Pipe A on external DP\n");
>> +		return;
>> +	}
>> +
>> +	if (test_type == test_basic_dsc_enable) {
>> +		igt_debug ("DSC is supported on %s\n",
>> +			   data->conn_name);
>> +		force_dp_dsc_enable(data);

Petri,
		I will do a igt_remove_fb() to avoid leaks.

>> +		igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
>> +				      data->mode->vdisplay,
>> +				      DRM_FORMAT_XRGB8888,
>> +				      LOCAL_DRM_FORMAT_MOD_NONE,
>> +				      &data->fb_test_pattern);
>
>This function is called from a loop and data->fb_test_pattern can contain an fb
>already, no? Does this leak?
>
>
>--
>Petri Latvala
>
>
>> +		primary = igt_output_get_plane_type(data->output,
>> +
>DRM_PLANE_TYPE_PRIMARY);
>> +		igt_plane_set_fb(primary, &data->fb_test_pattern);
>> +		igt_display_commit(&data->display);
>> +		/* Until we have CRC check support, manually check if RGB test
>pattern has no corruption */
>> +		manual ("RGB test pattern without corruption");
>> +		igt_assert_f(is_dp_dsc_enabled(data),
>> +			     "Default DSC enable failed on Connector: %s Pipe:
>%s",
>> +			     data->conn_name,
>> +			     kmstest_pipe_name(data->pipe));
>> +		clear_dp_dsc_enable(data);
>> +	} else {
>> +		igt_assert(!"Unknown test type\n");
>> +	}
>> +}
>> +
>> +static void run_test(data_t *data, igt_output_t *output,
>> +		     enum dsc_test_type test_type)
>> +{
>> +	enum pipe pipe;
>> +
And here, like you suggested on our conversation, change for_each_pipe_with_valid_output() to for_each_pipe() {
	And igt_pipe_connector_valid(pipe, output) - get valid connector for the pipe and set the rest.

Anusha 
>> +	for_each_pipe_with_valid_output(&data->display, pipe, output) {

>> +		igt_output_set_pipe(output, pipe);
>> +		data->pipe = pipe;
>> +		data->output = output;
>> +		update_display(data, test_type);
>> +	}
>> +}
>> +
>> +igt_main
>> +{
>> +	data_t data = {};
>> +	igt_output_t *output;
>> +	drmModeRes *res;
>> +	drmModeConnector *connector;
>> +	int i, test_conn_cnt, test_cnt;
>> +	int tests[] = {DRM_MODE_CONNECTOR_eDP,
>DRM_MODE_CONNECTOR_DisplayPort};
>> +
>> +	igt_fixture {
>> +		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
>> +		data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
>> +		kmstest_set_vt_graphics_mode();
>> +		igt_display_require(&data.display, data.drm_fd);
>> +		igt_require(res = drmModeGetResources(data.drm_fd));
>> +	}
>> +
>> +	for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
>> +
>> +		igt_subtest_f("basic-dsc-enable-%s",
>> +			      kmstest_connector_type_str(tests[test_cnt])) {
>> +			test_conn_cnt = 0;
>> +			for (i = 0; i < res->count_connectors; i++) {
>> +				connector =
>drmModeGetConnectorCurrent(data.drm_fd,
>> +								       res-
>>connectors[i]);
>> +				if (connector->connection !=
>DRM_MODE_CONNECTED ||
>> +				    connector->connector_type !=
>> +				    tests[test_cnt])
>> +					continue;
>> +				test_conn_cnt++;
>> +				output =
>igt_output_from_connector(&data.display, connector);
>> +				sprintf(data.conn_name, "%s-%d",
>> +					kmstest_connector_type_str(connector-
>>connector_type),
>> +					test_conn_cnt);
>> +				igt_require_f(is_dp_dsc_supported(&data),
>> +					      "DSC not supported on connector %s
>\n",
>> +					      data.conn_name);
>> +				if (connector->connector_type ==
>DRM_MODE_CONNECTOR_DisplayPort)
>> +
>	igt_require_f(is_dp_fec_supported(&data),
>> +						      "DSC cannot be enabled
>without FEC on %s\n",
>> +						      data.conn_name);
>> +				run_test(&data, output, test_basic_dsc_enable);
>> +			}
>> +			if (data.output)
>> +				test_cleanup(&data);
>> +			igt_skip_on(test_conn_cnt == 0);
>> +		}
>> +	}
>> +
>> +	igt_fixture {
>> +		drmModeFreeConnector(connector);
>> +		drmModeFreeResources(res);
>> +		close(data.debugfs_fd);
>> +		close(data.drm_fd);
>> +		igt_display_fini(&data.display);
>> +	}
>> +	igt_exit();
>> +}
>> diff --git a/tests/meson.build b/tests/meson.build
>> index b8a6e61b..e14ab2b4 100644
>> --- a/tests/meson.build
>> +++ b/tests/meson.build
>> @@ -25,6 +25,7 @@ test_progs = [
>>  	'kms_crtc_background_color',
>>  	'kms_cursor_crc',
>>  	'kms_cursor_legacy',
>> +	'kms_dp_dsc',
>>  	'kms_draw_crc',
>>  	'kms_fbcon_fbt',
>>  	'kms_fence_pin_leak',
>> --
>> 2.19.1
>>