[v2] drm/msm/dpu: add display port support in DPU

Submitted by Jeykumar Sankaran on Nov. 27, 2018, 10:28 p.m.

Details

Message ID 1543357710-3918-1-git-send-email-jsanka@codeaurora.org
State New
Headers show
Series "drm/msm/dpu: add display port support in DPU" ( rev: 1 ) in DRI devel

Not browsing as part of any series.

Commit Message

Jeykumar Sankaran Nov. 27, 2018, 10:28 p.m.
Add display port support in DPU by creating hooks
for DP encoder enumeration and encoder mode
initialization.

This change is based on the SDM845 Display port
driver changes[1].

changes in v2:
	- rebase on [2] (Sean Paul)
	- remove unwanted error checks and
	  switch cases (Jordan Crouse)

[1] https://lwn.net/Articles/768265/
[2] https://lkml.org/lkml/2018/11/17/87

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47 +++++++++++++++++++++++++----
 2 files changed, 45 insertions(+), 10 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index d3f4501..1f6b4b1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -2015,7 +2015,7 @@  static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 {
 	int ret = 0;
 	int i = 0;
-	enum dpu_intf_type intf_type;
+	enum dpu_intf_type intf_type = INTF_NONE;
 	struct dpu_enc_phys_init_params phys_params;
 
 	if (!dpu_enc || !dpu_kms) {
@@ -2038,9 +2038,9 @@  static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
 	case DRM_MODE_ENCODER_DSI:
 		intf_type = INTF_DSI;
 		break;
-	default:
-		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
-		return -EINVAL;
+	case DRM_MODE_ENCODER_TMDS:
+		intf_type = INTF_DP;
+		break;
 	}
 
 	WARN_ON(disp_info->num_of_h_tiles < 1);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 985c855..7d931ae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -473,6 +473,32 @@  static void _dpu_kms_initialize_dsi(struct drm_device *dev,
 	}
 }
 
+static void _dpu_kms_initialize_displayport(struct drm_device *dev,
+					    struct msm_drm_private *priv,
+					    struct dpu_kms *dpu_kms)
+{
+	struct drm_encoder *encoder = NULL;
+	int rc;
+
+	if (!priv->dp)
+		return;
+
+	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return;
+	}
+
+	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
+	if (rc) {
+		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
+		drm_encoder_cleanup(encoder);
+		return;
+	}
+
+	priv->encoders[priv->num_encoders++] = encoder;
+}
+
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
  *                           for underlying displays
@@ -487,6 +513,8 @@  static void _dpu_kms_setup_displays(struct drm_device *dev,
 {
 	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
 
+	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
+
 	/**
 	 * Extend this function to initialize other
 	 * types of displays
@@ -723,13 +751,20 @@  static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
 	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
 			MSM_DISPLAY_CAP_VID_MODE;
 
-	/* TODO: No support for DSI swap */
-	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
-		if (priv->dsi[i]) {
-			info.h_tile_instance[info.num_of_h_tiles] = i;
-			info.num_of_h_tiles++;
+	switch (info.intf_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/* TODO: No support for DSI swap */
+		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+			if (priv->dsi[i]) {
+				info.h_tile_instance[info.num_of_h_tiles] = i;
+				info.num_of_h_tiles++;
+			}
 		}
-	}
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+		info.num_of_h_tiles = 1;
+		break;
+	};
 
 	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
 	if (rc)

Comments

Hi Jeykumar,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robclark/msm-next]
[also build test ERROR on v4.20-rc4 next-20181130]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Jeykumar-Sankaran/drm-msm-dpu-add-display-port-support-in-DPU/20181130-230021
base:   git://people.freedesktop.org/~robclark/linux msm-next
config: arm-allmodconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.2.0 make.cross ARCH=arm 

All errors (new ones prefixed by >>):

   drivers/gpu//drm/msm/disp/dpu1/dpu_kms.c: In function '_dpu_kms_initialize_displayport':
>> drivers/gpu//drm/msm/disp/dpu1/dpu_kms.c:483:13: error: 'struct msm_drm_private' has no member named 'dp'; did you mean 'edp'?
     if (!priv->dp)
                ^~
                edp
>> drivers/gpu//drm/msm/disp/dpu1/dpu_kms.c:492:7: error: implicit declaration of function 'msm_dp_modeset_init'; did you mean 'msm_edp_modeset_init'? [-Werror=implicit-function-declaration]
     rc = msm_dp_modeset_init(priv->dp, dev, encoder);
          ^~~~~~~~~~~~~~~~~~~
          msm_edp_modeset_init
   drivers/gpu//drm/msm/disp/dpu1/dpu_kms.c:492:33: error: 'struct msm_drm_private' has no member named 'dp'; did you mean 'edp'?
     rc = msm_dp_modeset_init(priv->dp, dev, encoder);
                                    ^~
                                    edp
   cc1: some warnings being treated as errors

vim +483 drivers/gpu//drm/msm/disp/dpu1/dpu_kms.c

   475	
   476	static void _dpu_kms_initialize_displayport(struct drm_device *dev,
   477						    struct msm_drm_private *priv,
   478						    struct dpu_kms *dpu_kms)
   479	{
   480		struct drm_encoder *encoder = NULL;
   481		int rc;
   482	
 > 483		if (!priv->dp)
   484			return;
   485	
   486		encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
   487		if (IS_ERR(encoder)) {
   488			DPU_ERROR("encoder init failed for dsi display\n");
   489			return;
   490		}
   491	
 > 492		rc = msm_dp_modeset_init(priv->dp, dev, encoder);
   493		if (rc) {
   494			DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
   495			drm_encoder_cleanup(encoder);
   496			return;
   497		}
   498	
   499		priv->encoders[priv->num_encoders++] = encoder;
   500	}
   501	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
> Add display port support in DPU by creating hooks
> for DP encoder enumeration and encoder mode
> initialization.
> 
> This change is based on the SDM845 Display port
> driver changes[1].
> 
> changes in v2:
> 	- rebase on [2] (Sean Paul)
> 	- remove unwanted error checks and
> 	  switch cases (Jordan Crouse)
> 
> [1] https://lwn.net/Articles/768265/
> [2] https://lkml.org/lkml/2018/11/17/87
> 
> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47 +++++++++++++++++++++++++----
>  2 files changed, 45 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index d3f4501..1f6b4b1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
>  {
>  	int ret = 0;
>  	int i = 0;
> -	enum dpu_intf_type intf_type;
> +	enum dpu_intf_type intf_type = INTF_NONE;

dpu_intf_type seems unnecessary, you could just use the DRM_MODE_ENCODER_* value
directly?

>  	struct dpu_enc_phys_init_params phys_params;
>  
>  	if (!dpu_enc || !dpu_kms) {
> @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
>  	case DRM_MODE_ENCODER_DSI:
>  		intf_type = INTF_DSI;
>  		break;
> -	default:
> -		DPU_ERROR_ENC(dpu_enc, "unsupported display interface type\n");
> -		return -EINVAL;
> +	case DRM_MODE_ENCODER_TMDS:
> +		intf_type = INTF_DP;
> +		break;
>  	}
>  
>  	WARN_ON(disp_info->num_of_h_tiles < 1);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 985c855..7d931ae 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct drm_device *dev,
>  	}
>  }
>  
> +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
> +					    struct msm_drm_private *priv,
> +					    struct dpu_kms *dpu_kms)
> +{
> +	struct drm_encoder *encoder = NULL;
> +	int rc;
> +
> +	if (!priv->dp)
> +		return;
> +
> +	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
> +	if (IS_ERR(encoder)) {
> +		DPU_ERROR("encoder init failed for dsi display\n");
> +		return;
> +	}
> +
> +	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
> +	if (rc) {
> +		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
> +		drm_encoder_cleanup(encoder);
> +		return;
> +	}
> +
> +	priv->encoders[priv->num_encoders++] = encoder;

No need to keep track of drm resources at the driver level, the core will do
this for you. So can you please add a patch preceding this one to remove the
priv->encoders/crtc/planes/connectors arrays?

> +}
> +
>  /**
>   * _dpu_kms_setup_displays - create encoders, bridges and connectors
>   *                           for underlying displays
> @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct drm_device *dev,

Why are these functions voids? Seems like there are plenty of places for them to
fail :)

Let's add a patch to the beginning of this series to properly handle failures in
setup_displays and initialize_dsi

>  {
>  	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
>  
> +	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
> +
>  	/**
>  	 * Extend this function to initialize other
>  	 * types of displays
> @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
>  	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
>  			MSM_DISPLAY_CAP_VID_MODE;
>  
> -	/* TODO: No support for DSI swap */
> -	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> -		if (priv->dsi[i]) {
> -			info.h_tile_instance[info.num_of_h_tiles] = i;
> -			info.num_of_h_tiles++;
> +	switch (info.intf_type) {
> +	case DRM_MODE_ENCODER_DSI:
> +		/* TODO: No support for DSI swap */
> +		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> +			if (priv->dsi[i]) {
> +				info.h_tile_instance[info.num_of_h_tiles] = i;
> +				info.num_of_h_tiles++;
> +			}
>  		}
> -	}
> +		break;
> +	case DRM_MODE_ENCODER_TMDS:
> +		info.num_of_h_tiles = 1;
> +		break;
> +	};
>  
>  	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
>  	if (rc)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
> _______________________________________________
> Freedreno mailing list
> Freedreno@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/freedreno
On 2018-12-03 06:47, Sean Paul wrote:
> On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
>> Add display port support in DPU by creating hooks
>> for DP encoder enumeration and encoder mode
>> initialization.
>> 
>> This change is based on the SDM845 Display port
>> driver changes[1].
>> 
>> changes in v2:
>> 	- rebase on [2] (Sean Paul)
>> 	- remove unwanted error checks and
>> 	  switch cases (Jordan Crouse)
>> 
>> [1] https://lwn.net/Articles/768265/
>> [2] https://lkml.org/lkml/2018/11/17/87
>> 
>> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47
> +++++++++++++++++++++++++----
>>  2 files changed, 45 insertions(+), 10 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index d3f4501..1f6b4b1 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
>>  {
>>  	int ret = 0;
>>  	int i = 0;
>> -	enum dpu_intf_type intf_type;
>> +	enum dpu_intf_type intf_type = INTF_NONE;
> 
> dpu_intf_type seems unnecessary, you could just use the 
> DRM_MODE_ENCODER_*
> value
> directly?
> 
>>  	struct dpu_enc_phys_init_params phys_params;
>> 
>>  	if (!dpu_enc || !dpu_kms) {
>> @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
>>  	case DRM_MODE_ENCODER_DSI:
>>  		intf_type = INTF_DSI;
>>  		break;
>> -	default:
>> -		DPU_ERROR_ENC(dpu_enc, "unsupported display interface
> type\n");
>> -		return -EINVAL;
>> +	case DRM_MODE_ENCODER_TMDS:
>> +		intf_type = INTF_DP;
>> +		break;
>>  	}
>> 
>>  	WARN_ON(disp_info->num_of_h_tiles < 1);
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index 985c855..7d931ae 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
> drm_device *dev,
>>  	}
>>  }
>> 
>> +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
>> +					    struct msm_drm_private *priv,
>> +					    struct dpu_kms *dpu_kms)
>> +{
>> +	struct drm_encoder *encoder = NULL;
>> +	int rc;
>> +
>> +	if (!priv->dp)
>> +		return;
>> +
>> +	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
>> +	if (IS_ERR(encoder)) {
>> +		DPU_ERROR("encoder init failed for dsi display\n");
>> +		return;
>> +	}
>> +
>> +	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
>> +	if (rc) {
>> +		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
>> +		drm_encoder_cleanup(encoder);
>> +		return;
>> +	}
>> +
>> +	priv->encoders[priv->num_encoders++] = encoder;
> 
> No need to keep track of drm resources at the driver level, the core 
> will
> do
> this for you. So can you please add a patch preceding this one to 
> remove
> the
> priv->encoders/crtc/planes/connectors arrays?
> 
priv arrays for tracking drm components and priv->num_** counters are 
introduced
by mdp4/5. DPU just adapted the implementation.

De-coupling DPU from these arrays is much easier than fixing them in 
mdp4/5. I see
mdp5 is using it to track the max resources and also in ./msm_fbdev.c.

Thanks and Regards,
Jeykumar S.
>> +}
>> +
>>  /**
>>   * _dpu_kms_setup_displays - create encoders, bridges and connectors
>>   *                           for underlying displays
>> @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
> drm_device *dev,
> 
> Why are these functions voids? Seems like there are plenty of places 
> for
> them to
> fail :)
> 
> Let's add a patch to the beginning of this series to properly handle
> failures in
> setup_displays and initialize_dsi
> 
>>  {
>>  	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
>> 
>> +	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
>> +
>>  	/**
>>  	 * Extend this function to initialize other
>>  	 * types of displays
>> @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
> msm_kms *kms,
>>  	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
>>  			MSM_DISPLAY_CAP_VID_MODE;
>> 
>> -	/* TODO: No support for DSI swap */
>> -	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
>> -		if (priv->dsi[i]) {
>> -			info.h_tile_instance[info.num_of_h_tiles] = i;
>> -			info.num_of_h_tiles++;
>> +	switch (info.intf_type) {
>> +	case DRM_MODE_ENCODER_DSI:
>> +		/* TODO: No support for DSI swap */
>> +		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
>> +			if (priv->dsi[i]) {
>> +				info.h_tile_instance[info.num_of_h_tiles]
> = i;
>> +				info.num_of_h_tiles++;
>> +			}
>>  		}
>> -	}
>> +		break;
>> +	case DRM_MODE_ENCODER_TMDS:
>> +		info.num_of_h_tiles = 1;
>> +		break;
>> +	};
>> 
>>  	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
>>  	if (rc)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
>> a Linux Foundation Collaborative Project
>> 
>> _______________________________________________
>> Freedreno mailing list
>> Freedreno@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/freedreno
On Mon, Dec 03, 2018 at 07:02:07PM -0800, Jeykumar Sankaran wrote:
> On 2018-12-03 06:47, Sean Paul wrote:
> > On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
> > > Add display port support in DPU by creating hooks
> > > for DP encoder enumeration and encoder mode
> > > initialization.
> > > 
> > > This change is based on the SDM845 Display port
> > > driver changes[1].
> > > 
> > > changes in v2:
> > > 	- rebase on [2] (Sean Paul)
> > > 	- remove unwanted error checks and
> > > 	  switch cases (Jordan Crouse)
> > > 
> > > [1] https://lwn.net/Articles/768265/
> > > [2] https://lkml.org/lkml/2018/11/17/87
> > > 
> > > Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> > > ---
> > >  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
> > >  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47
> > +++++++++++++++++++++++++----
> > >  2 files changed, 45 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > index d3f4501..1f6b4b1 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > > @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
> > dpu_encoder_virt *dpu_enc,
> > >  {
> > >  	int ret = 0;
> > >  	int i = 0;
> > > -	enum dpu_intf_type intf_type;
> > > +	enum dpu_intf_type intf_type = INTF_NONE;
> > 
> > dpu_intf_type seems unnecessary, you could just use the
> > DRM_MODE_ENCODER_*
> > value
> > directly?
> > 
> > >  	struct dpu_enc_phys_init_params phys_params;
> > > 
> > >  	if (!dpu_enc || !dpu_kms) {
> > > @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
> > dpu_encoder_virt *dpu_enc,
> > >  	case DRM_MODE_ENCODER_DSI:
> > >  		intf_type = INTF_DSI;
> > >  		break;
> > > -	default:
> > > -		DPU_ERROR_ENC(dpu_enc, "unsupported display interface
> > type\n");
> > > -		return -EINVAL;
> > > +	case DRM_MODE_ENCODER_TMDS:
> > > +		intf_type = INTF_DP;
> > > +		break;
> > >  	}
> > > 
> > >  	WARN_ON(disp_info->num_of_h_tiles < 1);
> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > index 985c855..7d931ae 100644
> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> > > @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
> > drm_device *dev,
> > >  	}
> > >  }
> > > 
> > > +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
> > > +					    struct msm_drm_private *priv,
> > > +					    struct dpu_kms *dpu_kms)
> > > +{
> > > +	struct drm_encoder *encoder = NULL;
> > > +	int rc;
> > > +
> > > +	if (!priv->dp)
> > > +		return;
> > > +
> > > +	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
> > > +	if (IS_ERR(encoder)) {
> > > +		DPU_ERROR("encoder init failed for dsi display\n");
> > > +		return;
> > > +	}
> > > +
> > > +	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
> > > +	if (rc) {
> > > +		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
> > > +		drm_encoder_cleanup(encoder);
> > > +		return;
> > > +	}
> > > +
> > > +	priv->encoders[priv->num_encoders++] = encoder;
> > 
> > No need to keep track of drm resources at the driver level, the core
> > will
> > do
> > this for you. So can you please add a patch preceding this one to remove
> > the
> > priv->encoders/crtc/planes/connectors arrays?
> > 
> priv arrays for tracking drm components and priv->num_** counters are
> introduced
> by mdp4/5. DPU just adapted the implementation.
> 
> De-coupling DPU from these arrays is much easier than fixing them in mdp4/5.
> I see
> mdp5 is using it to track the max resources and also in ./msm_fbdev.c.

Ok, I'll take a look at it

Sean

> 
> Thanks and Regards,
> Jeykumar S.
> > > +}
> > > +
> > >  /**
> > >   * _dpu_kms_setup_displays - create encoders, bridges and connectors
> > >   *                           for underlying displays
> > > @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
> > drm_device *dev,
> > 
> > Why are these functions voids? Seems like there are plenty of places for
> > them to
> > fail :)
> > 
> > Let's add a patch to the beginning of this series to properly handle
> > failures in
> > setup_displays and initialize_dsi
> > 
> > >  {
> > >  	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
> > > 
> > > +	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
> > > +
> > >  	/**
> > >  	 * Extend this function to initialize other
> > >  	 * types of displays
> > > @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
> > msm_kms *kms,
> > >  	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
> > >  			MSM_DISPLAY_CAP_VID_MODE;
> > > 
> > > -	/* TODO: No support for DSI swap */
> > > -	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> > > -		if (priv->dsi[i]) {
> > > -			info.h_tile_instance[info.num_of_h_tiles] = i;
> > > -			info.num_of_h_tiles++;
> > > +	switch (info.intf_type) {
> > > +	case DRM_MODE_ENCODER_DSI:
> > > +		/* TODO: No support for DSI swap */
> > > +		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> > > +			if (priv->dsi[i]) {
> > > +				info.h_tile_instance[info.num_of_h_tiles]
> > = i;
> > > +				info.num_of_h_tiles++;
> > > +			}
> > >  		}
> > > -	}
> > > +		break;
> > > +	case DRM_MODE_ENCODER_TMDS:
> > > +		info.num_of_h_tiles = 1;
> > > +		break;
> > > +	};
> > > 
> > >  	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
> > >  	if (rc)
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > Forum,
> > > a Linux Foundation Collaborative Project
> > > 
> > > _______________________________________________
> > > Freedreno mailing list
> > > Freedreno@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/freedreno
> 
> -- 
> Jeykumar S
On 2018-12-03 06:47, Sean Paul wrote:
> On Tue, Nov 27, 2018 at 02:28:30PM -0800, Jeykumar Sankaran wrote:
>> Add display port support in DPU by creating hooks
>> for DP encoder enumeration and encoder mode
>> initialization.
>> 
>> This change is based on the SDM845 Display port
>> driver changes[1].
>> 
>> changes in v2:
>> 	- rebase on [2] (Sean Paul)
>> 	- remove unwanted error checks and
>> 	  switch cases (Jordan Crouse)
>> 
>> [1] https://lwn.net/Articles/768265/
>> [2] https://lkml.org/lkml/2018/11/17/87
>> 
>> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  8 ++---
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     | 47
> +++++++++++++++++++++++++----
>>  2 files changed, 45 insertions(+), 10 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> index d3f4501..1f6b4b1 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> @@ -2015,7 +2015,7 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
>>  {
>>  	int ret = 0;
>>  	int i = 0;
>> -	enum dpu_intf_type intf_type;
>> +	enum dpu_intf_type intf_type = INTF_NONE;
> 
> dpu_intf_type seems unnecessary, you could just use the 
> DRM_MODE_ENCODER_*
> value
> directly?
> 
enum dpu_intf_type enumerates HW interface types the SOC has. Below 
switch
case maps the DRM_MODE_ENCODER_* to HW dpu_intf_type it should reserve.
Note that DRM_MODE_ENCODER_* and dpu_intf_type are not mapped 1-to-1.
e.g. DRM_MODE_ENCODER_TMDS can be mapped to HDMI or DisplayPort.

Thanks,
Jeykumar S.

>>  	struct dpu_enc_phys_init_params phys_params;
>> 
>>  	if (!dpu_enc || !dpu_kms) {
>> @@ -2038,9 +2038,9 @@ static int dpu_encoder_setup_display(struct
> dpu_encoder_virt *dpu_enc,
>>  	case DRM_MODE_ENCODER_DSI:
>>  		intf_type = INTF_DSI;
>>  		break;
>> -	default:
>> -		DPU_ERROR_ENC(dpu_enc, "unsupported display interface
> type\n");
>> -		return -EINVAL;
>> +	case DRM_MODE_ENCODER_TMDS:
>> +		intf_type = INTF_DP;
>> +		break;
>>  	}
>> 
>>  	WARN_ON(disp_info->num_of_h_tiles < 1);
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index 985c855..7d931ae 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -473,6 +473,32 @@ static void _dpu_kms_initialize_dsi(struct
> drm_device *dev,
>>  	}
>>  }
>> 
>> +static void _dpu_kms_initialize_displayport(struct drm_device *dev,
>> +					    struct msm_drm_private *priv,
>> +					    struct dpu_kms *dpu_kms)
>> +{
>> +	struct drm_encoder *encoder = NULL;
>> +	int rc;
>> +
>> +	if (!priv->dp)
>> +		return;
>> +
>> +	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_TMDS);
>> +	if (IS_ERR(encoder)) {
>> +		DPU_ERROR("encoder init failed for dsi display\n");
>> +		return;
>> +	}
>> +
>> +	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
>> +	if (rc) {
>> +		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
>> +		drm_encoder_cleanup(encoder);
>> +		return;
>> +	}
>> +
>> +	priv->encoders[priv->num_encoders++] = encoder;
> 
> No need to keep track of drm resources at the driver level, the core 
> will
> do
> this for you. So can you please add a patch preceding this one to 
> remove
> the
> priv->encoders/crtc/planes/connectors arrays?
> 
>> +}
>> +
>>  /**
>>   * _dpu_kms_setup_displays - create encoders, bridges and connectors
>>   *                           for underlying displays
>> @@ -487,6 +513,8 @@ static void _dpu_kms_setup_displays(struct
> drm_device *dev,
> 
> Why are these functions voids? Seems like there are plenty of places 
> for
> them to
> fail :)
> 
> Let's add a patch to the beginning of this series to properly handle
> failures in
> setup_displays and initialize_dsi
> 
>>  {
>>  	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
>> 
>> +	_dpu_kms_initialize_displayport(dev, priv, dpu_kms);
>> +
>>  	/**
>>  	 * Extend this function to initialize other
>>  	 * types of displays
>> @@ -723,13 +751,20 @@ static void _dpu_kms_set_encoder_mode(struct
> msm_kms *kms,
>>  	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
>>  			MSM_DISPLAY_CAP_VID_MODE;
>> 
>> -	/* TODO: No support for DSI swap */
>> -	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
>> -		if (priv->dsi[i]) {
>> -			info.h_tile_instance[info.num_of_h_tiles] = i;
>> -			info.num_of_h_tiles++;
>> +	switch (info.intf_type) {
>> +	case DRM_MODE_ENCODER_DSI:
>> +		/* TODO: No support for DSI swap */
>> +		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
>> +			if (priv->dsi[i]) {
>> +				info.h_tile_instance[info.num_of_h_tiles]
> = i;
>> +				info.num_of_h_tiles++;
>> +			}
>>  		}
>> -	}
>> +		break;
>> +	case DRM_MODE_ENCODER_TMDS:
>> +		info.num_of_h_tiles = 1;
>> +		break;
>> +	};
>> 
>>  	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
>>  	if (rc)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
>> a Linux Foundation Collaborative Project
>> 
>> _______________________________________________
>> Freedreno mailing list
>> Freedreno@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/freedreno