drm/i915: HDMI audio gets the TMDS clock by crtc_clock

Submitted by libin.yang@linux.intel.com on Aug. 2, 2016, 6:17 a.m.

Details

Message ID 1470118667-97499-1-git-send-email-libin.yang@linux.intel.com
State New
Headers show
Series "drm/i915: HDMI audio gets the TMDS clock by crtc_clock" ( rev: 1 ) in Intel GFX

Not browsing as part of any series.

Commit Message

libin.yang@linux.intel.com Aug. 2, 2016, 6:17 a.m.
From: Libin Yang <libin.yang@linux.intel.com>

HDMI audio should use crtc_clock to get the TMDS clock.

Besides, this patch renames mode to adjusted_mode to unify the name.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_audio.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index de55ecf..a291a31 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -146,7 +146,7 @@  static int audio_config_get_n(struct intel_crtc *crtc,
 	if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
 		for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
 			if ((rate == aud_ncts[i].sample_rate) &&
-				(adjusted_mode->clock == aud_ncts[i].clock)) {
+			    (adjusted_mode->crtc_clock == aud_ncts[i].clock)) {
 				return aud_ncts[i].n;
 			}
 		}
@@ -215,8 +215,8 @@  static uint32_t audio_config_setup_m_reg(struct intel_crtc *crtc,
 static bool audio_rate_need_prog(struct intel_crtc *crtc,
 				 const struct drm_display_mode *adjusted_mode)
 {
-	if (((adjusted_mode->clock == TMDS_297M) ||
-		 (adjusted_mode->clock == TMDS_296M)) &&
+	if (((adjusted_mode->crtc_clock == TMDS_297M) ||
+		 (adjusted_mode->crtc_clock == TMDS_296M)) &&
 		intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
 		return true;
 	else if (((crtc->config->port_clock == LC_540M) ||
@@ -711,7 +711,7 @@  static int i915_audio_component_sync_audio_rate(struct device *dev,
 	struct drm_i915_private *dev_priv = dev_to_i915(dev);
 	struct intel_encoder *intel_encoder;
 	struct intel_crtc *crtc;
-	struct drm_display_mode *mode;
+	struct drm_display_mode *adjusted_mode;
 	struct i915_audio_component *acomp = dev_priv->audio_component;
 	enum pipe pipe = INVALID_PIPE;
 	u32 tmp, m;
@@ -747,20 +747,20 @@  static int i915_audio_component_sync_audio_rate(struct device *dev,
 
 	DRM_DEBUG_KMS("pipe %c connects port %c\n",
 				  pipe_name(pipe), port_name(port));
-	mode = &crtc->config->base.adjusted_mode;
+	adjusted_mode = &crtc->config->base.adjusted_mode;
 
 	/* port must be valid now, otherwise the pipe will be invalid */
 	acomp->aud_sample_rate[port] = rate;
 
 	/* 2. check whether to set the N/CTS/M manually or not */
-	if (!audio_rate_need_prog(crtc, mode)) {
+	if (!audio_rate_need_prog(crtc, adjusted_mode)) {
 		tmp = I915_READ(HSW_AUD_CFG(pipe));
 		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
 		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
 		goto unlock;
 	}
 
-	n = audio_config_get_n(crtc, mode, rate);
+	n = audio_config_get_n(crtc, adjusted_mode, rate);
 	if (n == 0) {
 		DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n",
 					  port_name(port));

Comments

This patch is based on drm/i915: set proper N/M in modeset

Regards,
Libin


> -----Original Message-----
> From: libin.yang@linux.intel.com [mailto:libin.yang@linux.intel.com]
> Sent: Tuesday, August 2, 2016 2:18 PM
> To: intel-gfx@lists.freedesktop.org; jani.nikula@linux.intel.com;
> ville.syrjala@linux.intel.com; Vetter, Daniel <daniel.vetter@intel.com>;
> tiwai@suse.de
> Cc: Yang, Libin <libin.yang@intel.com>; Libin Yang
> <libin.yang@linux.intel.com>
> Subject: [PATCH] drm/i915: HDMI audio gets the TMDS clock by crtc_clock
> 
> From: Libin Yang <libin.yang@linux.intel.com>
> 
> HDMI audio should use crtc_clock to get the TMDS clock.
> 
> Besides, this patch renames mode to adjusted_mode to unify the name.
> 
> Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_audio.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_audio.c
> b/drivers/gpu/drm/i915/intel_audio.c
> index de55ecf..a291a31 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -146,7 +146,7 @@ static int audio_config_get_n(struct intel_crtc *crtc,
>  	if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
>  		for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
>  			if ((rate == aud_ncts[i].sample_rate) &&
> -				(adjusted_mode->clock == aud_ncts[i].clock)) {
> +			    (adjusted_mode->crtc_clock == aud_ncts[i].clock)) {
>  				return aud_ncts[i].n;
>  			}
>  		}
> @@ -215,8 +215,8 @@ static uint32_t audio_config_setup_m_reg(struct
> intel_crtc *crtc,  static bool audio_rate_need_prog(struct intel_crtc *crtc,
>  				 const struct drm_display_mode
> *adjusted_mode)  {
> -	if (((adjusted_mode->clock == TMDS_297M) ||
> -		 (adjusted_mode->clock == TMDS_296M)) &&
> +	if (((adjusted_mode->crtc_clock == TMDS_297M) ||
> +		 (adjusted_mode->crtc_clock == TMDS_296M)) &&
>  		intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
>  		return true;
>  	else if (((crtc->config->port_clock == LC_540M) || @@ -711,7 +711,7
> @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
>  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
>  	struct intel_encoder *intel_encoder;
>  	struct intel_crtc *crtc;
> -	struct drm_display_mode *mode;
> +	struct drm_display_mode *adjusted_mode;
>  	struct i915_audio_component *acomp = dev_priv->audio_component;
>  	enum pipe pipe = INVALID_PIPE;
>  	u32 tmp, m;
> @@ -747,20 +747,20 @@ static int
> i915_audio_component_sync_audio_rate(struct device *dev,
> 
>  	DRM_DEBUG_KMS("pipe %c connects port %c\n",
>  				  pipe_name(pipe), port_name(port));
> -	mode = &crtc->config->base.adjusted_mode;
> +	adjusted_mode = &crtc->config->base.adjusted_mode;
> 
>  	/* port must be valid now, otherwise the pipe will be invalid */
>  	acomp->aud_sample_rate[port] = rate;
> 
>  	/* 2. check whether to set the N/CTS/M manually or not */
> -	if (!audio_rate_need_prog(crtc, mode)) {
> +	if (!audio_rate_need_prog(crtc, adjusted_mode)) {
>  		tmp = I915_READ(HSW_AUD_CFG(pipe));
>  		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
>  		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
>  		goto unlock;
>  	}
> 
> -	n = audio_config_get_n(crtc, mode, rate);
> +	n = audio_config_get_n(crtc, adjusted_mode, rate);
>  	if (n == 0) {
>  		DRM_DEBUG_KMS("Using automatic mode for N value on
> port %c\n",
>  					  port_name(port));
> --
> 1.9.1